User Manual

20
7
General Setting
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No.23 menu. The LCD displays
"SQL".
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted value
4.
1-20: total 20 squelch levels
OFF: Turn off squelch function, the
background noise keep on.
Press the Main band selector knob or
5.
key to store value and back
to function menu. Press key or hold selector knob for over 0.5
second to store setup and exit.
With this function on, the transceiver will be able to communicate with a
transceiver in same network without through a repeater.
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No 24 menu. The LCD displays "REV"
SQUELCH LEVEL SETUP
FREQUENCY REVERSE
Press the Main band selector knob to enter function setup.
3.
4.
Switch the Main band selector knob to choose wanted value.
ON: Frequency Reverse is turn on.
OFF: Turn off Frequency Reverse.
Press the Main band selector knob or
key to store value and
back to function menu. Press key or hold selector knob for over
0.5 second to store setup and exit.
5.
Press
1.
to enter function menu
Turn the Main band selector knob to
2.
choose NO.27 menu, the LCD displays
"HYPER".
Press the Main band selector knob to enter function setup.
3.
EDITING CHANNEL NAME
After edit a name for a channel, if the display mode is channel name, the
will display the name edited in this menu. Otherwise it will display the
frequency.
Press
1.
key to enter function menu.
Switch the selector knob to choose NO.26
2.
function menu, the LCD displays "NAME C".
Press the Main band selector knob to enter function setup.
3.
Switch the selector knob to choo se
4.
wanted character.
Press the selector knob to conrm current character and start edit
5.
next character, after editing all 7 characters, press the selector knob
to conrm and back to function menu.
If the editing not reach 7 characters, press
6.
key back to function
menu, then press key or hold selector knob for over 0.5 second
to store setup and exit.
CHANNEL FUNCTION AUTO STORAGE SETUP
This function is used to store lastest setup for each single channel.
when this function is on, all the latest temporary operation for present
channel will be stored no matter change channel or power off radio.
when this function is off, the temporary setup will not be stored, the
channel informaiton will resume to the last stored value after change
channel or power off radio.