User Manual

18
General Setting
This function uses to start repeater. It needs certain intensity Pilot
Frequency to start a dormant repeater. As usual, no need to send pilot
frequency again once repeater started.
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No.19 menu. The LCD displays
"TBST".
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted frequency.
4.
1000: Pilot Frequency is 1000Hz.
1450: Pilot Frequency is 1450Hz.
1750: Pilot Frequency is 1750Hz.
2100: Pilot Frequency is 2100Hz.
TONE BURST (PILOT FREQUENCY)
To enable communication with scrambler, 2 transceivers shall set with
same group.
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted group
4.
1-9 (9 fix groups) U1, U2 (2 self defined
scrambler groups), OFF.
Press the Main
5.
band selector knob or key to store value and
back to function menu. Press key or hold selector knob for over
0.5 second to store setup and exit.
7
NOTE
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press key or hold selector knob for over
0.5 second to store setup and exit.
Left
long press: In standby, long press this key to add/
delete optional signaling, repeat the long press it will set
optional signaling DTMF, 5TONE or 2TONE. When the LCD
displays DT means DTMF, displays 5T means 5TONE,
displays 2T means 2TONE.
Right
Short press: In VFO mode, short press this key,
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No.20 menu. The LCD displays
"KEYMOD".
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted mode.
4.
KEY1: key1 mode, Normal mode, the left 4 keys have same functions
as the right 4 keys.
KYE2: the left 4 keypads will shared by
both band. And the right 4 key
pads will be re-dened.
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press key or hold selector knob for over
0.5 second to store setup and exit.
KEYPAD MODE SETUP
Notice: Denition of Keypad in KEY2 mode:
1.
2.