User Manual

15
General Setting
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No. 08 menu. the LCD displays
"5TN ENC".
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to
4.
choose wanted value.
Available Values: 0-99, total 100 groups.
This transceiver has 3 optional signaling: DTMF/5Tone/2Tone,those
signaling function similar to CTCSS/DCS signaling. DTMF and 5Tone
signaling can be applied for other advanced features such as ANI, group
call, select call, remotely stun, remotely kill waken etc..
Press
1.
key to enter function menu.
Turn the Main band selector knob to choose No. 09 menu. The LCD
2.
displays "TON DEC".
Press the Main band selector knob to
3.
enter function setup.
Switch the Main band selector knob to choose wanted value
4.
DT: means DTMF signaling is added.
2T: means DTMF signaling is added.
5T: means DTMF signaling is added.
5TONE ENCODE SELECT
ADD OPTIONAL SIGNALING
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press key or hold selector knob for over
0.5 second to store setup and exit.
if the 5TONE encode are set up with name, the LCD will display
corresponding name.
The working of optional signaling shall be work associated with the squelch
mode setup. (Refer to Squelch Mode setup in page 20)
OFF: Turn off optional signaling
Press the Main band selector knob or
5.
key to store value and back to function menu. Press key
or hold selector knob for over 0.5 second to store setup and exit.
7
NOTE
NOTE
Press
1.
key to enter function menu.
Switch the Main band selector knob to
2.
choose No.11 menu, the LCD displays
"RX CDCS".
Press the Main band selector knob to enter function setup
3.
Switch the Main band selector knob to choose wanted value
4.
OFF: Turn off CTCSS/DCS decode.
CTCSS: Choose CTCSS decode.
DCS: Choose DCS decode.
Press the Main band selector knob to enter the menu.
5.
Switch the Main band selector knob to choose wanted CTCSS, DCS
6.
code.
CTCSS: 62.5-254.1HZ, and one self-
dened group, total 52 groups
DCS: 000N-777I, total 1024 groups
Press the Main band selector knob or
7.
key to store value and
back to function menu. Press key or hold selector knob for over
0.5 second to store setup and exit.
CTCSS/DCS DECODE SETUP
The working of CTCSS/DCS decode shall be work associated with the
squelch mode setup. (Refer to Squelch Mode setup in page 20)
NOTE