User Manual

13
General Setting
Once APO is activated, the transceiver will be automatically switched off
when the pre-set timer running out.
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No. 01 menu. The LCD displays
"APO".
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to
4.
choose wanted value. Available values:
0.5-12Hours, OFF
Press the Main band selector knob or
5.
key to store value and
back to function menu.
Press
key or hold selector knob for over 0.5 second to store
setup
and exit.
Only in frequency (VFO) mode, this function is valid. Turn selector knob to select
frequency or frequency scanning which is restricted by frequency step size.
Press
1.
key to enter function menu.
Turn the Main band selector knob to choose
2.
No. 03 menu. the LCD displays "STEP".
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted value.
4.
Available Values:2.5K,5K,6.25K,
8.33K,10K,12.5K,15K,20K, 25K.
Press the Main band selector knob or
5.
key to store value and
back to function menu.
Press
key or hold selector knob for over 0.5 second to store
setup and exit.
APO (AUTOMATIC POWER OFF)
FREQUENCY CHANNEL STEP SETUP
7
Basic operation steps for Function menu
1.
Press key to enter function menu.
2.
Turn the Main band selector knob to choose wanted function.
3.
Press the Main band selector knob to enter function setup.
4.
Switch the Main band selector knob to choose wanted value.
5.
Press the Main band selector knob to store value and back to
function menu. Press
key or hold selector knob for over 0.5
second to store setup and exit.
This function is auto-hidden in channel mode
NOTE