Operating Instructions

STANDARD ACCESSORIES

INSTALLLATON

Radio

Screws for

bracket

Self-tapping

Screws

Microphone

Pads for

bracket

PadsAdjusting

screws

Microphone

Hanger

Mounting Bracket Non-slip

Mat

Spare Fuses

(10A, 125V)

Choose the most appropriate setting from a simple and

practical point of view. Your radio should not interfere

with the driver or crash the driver's knee or leg when

rush brake.

Microphone connection

1. Plug microphone connector into jack.

2. Pull on the screw for microphone connector.

1. Using the self-tapping screws and pads(2 sets) to x

the bracket.

2. Put the Non-slip mat on the 2 ends of the bracket and put in the radio. Then insert

the adjusting screws and check careful each screws, make sure the screws and

machine will not loose when the car shaking.

3. Choose suitable angle by the 3 screw holes in the two ends of bracket.