Operating Instructions

11
【
SCAN/SKP
】
Scan function
1. Short press
【
SCAN
】
to enter scan function, LCD displays "SC";
2. In scan mode, Turn channel switch will change scan direction.
3. Short press
【
SCAN
】
again to exit.
Add/delete scan list function
1. Long press
【
SCAN
】
for 2 seconds to add or delete the current channel from
scan list;
2. When LCD displays "●", current channel is not added to scan list; When LCD
does not display "●", current channel is added to scan list.
【
MEM/STOR
】
Using memory channel:
1. Short press
【
MEM
】
to enter memory channel, turn channel switch to choose
memory channel. M1-M6, Total 6 memory channels.
2. Short press
【
MEM
】
again to exit memory channel mode.
Store/Delete memory channel:
1. Store memory channel
When the radio is not in memory channel mode, choose the channel to be
stored, and hold
【
MEM
】
enter storage mode, the channel number ashes, Turn
Channel switch to choose the location to be stored (M1-M6), then hold
【
MEM
】
until the ashing channel number disappear, the storage is done.
2. Delete memory channel
In channel mode, hold
【
MEM
】
for over 2 seconds, the memory channel
number ashes, turn the CH switch to choose the memory to be deleted. Then
hold
【
MEM
】
until the ashing channel number disappear, the delete is done.
【
EMG/LOCK
】
Choose EMG channel:
Short press
【
EMG
】
to use Emergency channel, LCD displays "EMG".
1. Short press
【
EMG
】
once to choose CH9;
2. Short press
【
EMG
】
again to choose CH19;
3. Short press
【
EMG
】
thrice to return to last normal channel.
Keypad Lock Function:
1. Long press
【
EMG
】
to lock keys, LCD displays "
";
2. Long press
【
EMG
】
again to unlock the keys.
Note: When this function is turned on, only PTT button is valid.