Operating Instructions

10
【
NB/HCUT
】
NB function
1. Short press
【
NB
】
to enter NB function, LCD displays "NB";
2. Short press
【
NB
】
again to turn off NB function.
HI-CUT function
1. Long press
【
NB
】
for 2 seconds to enter HI-CUT function, LCD displays "HIC";
2. Long press
【
NB
】
for 2 seconds again to turn off HI-CUT function
【
RB/BEEP
】
RB function
1. Short press
【
RB
】
to turn on RB function, LCD displays "RB";
2. Press
【
PUSH
】
to select RB frequency, turn on channel switch to select.
OFF~5, total 6 groups.
OFF: Turn off RB function;
3. Press
【
PUSH
】
to store and exit.
BEEP Voice Prompt function
1. Long press
【
RB
】
for 2 seconds to enter BEEP voice prompt function, LCD
displays "RB";
2. Long press
【
RB
】
for 2 seconds again to turn off BEEP voice prompt function.
【
DW/+10K
】
Dual-Watch function
1. Short press
【
DW
】
to turn on Dual watch, LCD displays "DW";
2. Short press
【
DW
】
again or press PTT to exit DW mode;
Frequency+10KHz function
1. Long press
【
DW
】
for 2 seconds to turn on frequency +10KHz function, LCD
displays "10K";
2. Long press
【
DW
】
for 2 seconds again to turn off frequency +10KHz function.
CTCSS/DCS Function
1. Long press
【
MODE
】
for 2 seconds to enter CTCSS/DCS function, LCD
displays "CTCSS" or "DCS";
2. Press
【
PUSH
】
to set CTCSS/DCS, turn channel switch to select CTCSS/
DCS, then Press
【
PUSH
】
to store and exit.
OFF: Turn off CTCSS/DCS function;
CTCSS: 67.0~250.3Hz, Total 38 groups;
DCS: D023N~D754N, Total 104 groups;
Note: This function is available only when install Optional CTCSS board.