User's Manual
Table Of Contents
54
ADVANCED FUNCTION OPERATIONS
Optional signal (5TONE)
Users can set the "Optional Signaling" as 5Tone in each channel by programming software. 5Tone has
similar functions to CTCSS/DCS and DTMF, it allows for Selective Calling, Group Calling, All Call, PTT ID,
Remote Stun, Remote Kill, Data Transmission (Text), Alarm, ANI etc.
First setup your radios encode (sending) and decoding (receiving) options on your radio via programming
software
Selective Calling: Call the receiver’s self ID directly – If you set up an encode memory to call another 1.
user directly (their 5 Digit PTTID encode) you can Access the 5TONE encode menu (NO.04(OBLTR-
8R)/NO.05(TERMN-8R)) to choose your saved signaling (Memory Group) then press PTT key.
Receiver can hear the calling after receive matching ID. (According to how they have their Squelch
setup (see Squelch options))
Group Calling/ All Call: Call by Group or Call All ID – To Group Call (or Call All) you need to use a Wild 2.
Card Character: A – to repeat Characters (In this case the wild card character) you use the Repeat
Character: E.
Replace one of the 5 Digits of the Encode setup with the Wild Card Character (A) to call by group. after
the receiver receive 5Tone encode. If you set up an encode memory to call by group/all (their 5 Digit
PTTID encode) you can Access the 5TONE encode menu (NO.04(OBLTR-8R)/NO.05(TERMN-8R)) to
choose your saved signaling (Memory Group) then press PTT key. Receiver/s can hear the calling after
receive matching ID. (According to how they have their Squelch setup (see Squelch options)
Example: