User's Manual

39
FUNCTION MENU SETUP(VERSION D)
VOX Delay Setup
In order to prevent the transceiver from returning back to the receive mode during
a VOX initiated call, (which may cause some of the transmission to be missed) the
user can set a suitable delay time before the VOX transmission is ended.
1. Press key, the top left corner of LCD displays " " icon, then press key
enter into function menu.
2. Press / key to choose NO.22(OBLTR-8R)/NO.37(TERMN-8R) function item, it shows "VDELAY"
on LCD.
3. Rotate channel selector knob to choose desired setup.
0.5S-3S: Total 27 levels for optional, each interval is 0.1S
4. Press key or key to conrm and exit.
Automatic Power Off Time setup
When this function is on, transceiver will automatic power off when reach the preset time.
1. Press key, the top left corner of LCD displays " " icon, then press key enter into function menu.
2. Press / key to choose NO.23(OBLTR-8R)/NO.38(TERMN-8R) function item, it shows "APO"
on LCD.
1~10: Total 10 VOX levels for optional.
OFF: VOX function is disabled.
4. Press key or key to conrm and exit.