User's Manual

34
FUNCTION MENU SETUP
Offset Frequency setup
This function will allow your radio to communicate through a repeater. When the repeater receives signals
at one frequency, it will transmit them on another frequency. The difference between these two frequencies
is called the offset frequency.
1. Press
key, the top left corner of LCD displays " " icon, then press
key enter into function menu.
2. Press
/ key to choose NO.13(OBLTR-8R)/NO.14(TERMN-8R) function
item, it shows "OFFSET" on LCD.
3. Rotate channel selector knob to choose desired offset frequency.
Frequency range is 00-70MHz.
4. Press
key or key to conrm and exit.
Editing Channel name
1. Press key, the top left corner of LCD displays " " icon, then press key
enter into function menu.
2. Press
/ key to choose NO.14(OBLTR-8R)/NO.15(TERMN-8R) function
item, it shows "-" on LCD.
3. Rotate channel selector knob to choose desired character, press
key to conrm current character
and move shift to next character. Press
key back to the previous character.
4. Press
key or key to conrm and exit.
OFF: Close Talk Around function.
4. Press
key or key to conrm and exit.