User's Manual

21
SHORTCUT OPERATIONS
Frequency/Channel Scan
Under the corresponding mode, press key, the top left corner of LCD displays " " icon, then press
key to start frequency scan or channel scan.
Frequency Scan1.
Under VFO mode, frequency scanning is available. The frequencies will be scanned by the transceiver's
‘step’ setup, press any numeric key or key to exit.
Channel Scan2.
Under channel mode, channel scanning is available. The channels will be scanned in order of the
channel setup as long as they are not programmed to "Skip" during scanning, Press numeric key or the
key to exit.
Channel Scan Skip
Under channel mode, press key, the top left corner of LCD displays " " icon, then press
key to set current selected channel as Channel scan skip. Repeat above operation to cancel channel scan
skip.
LCD displayed "
1.
S
" means the current channel will not be scanned.
"2.
S
" icon disappeared means the current channel will be scanned.
Frequency Reverse
When in standby, press key, the top left corner of LCD displays " " icon, then press key to
set arrow directed channel as frequency reverse, repeat above operation to turn off frequency reverse.