User's Manual
Table Of Contents
07
INSTALLATION & CONNECTION
Installing / Removing the Battery
Installing / Removing the Antenna
■ Installing the Antenna:
Screw the antenna into the connector on the top of the transceiver
by holding the antenna at its base and turning it clockwise until
secure.
■ Installing the Battery:
Lay the battery to face the back of the radio.
1.
Press the bottom of the battery, the latch in the bottom of 2.
the transceiver lock will release. After hearing a "click", the
battery has been locked.
3
4
■ Removing the Battery:
According to “ ”on the battery release, push the battery lock
release tab to remove the battery.
■ Removing the Antenna:
To remove it: Turn the antenna counterclockwise until the antenna
has been removed from the threads of the transceiver.