User's Manual

05
NOTE: When charging a powered on transceiver equipped with battery, the LED will not turn to green to
show the full charge status. Only when you turn off the transceiver, will the LED indicate normally. If the
transceiver is powered on, it will continually consume energy. The charger cannot detect when the battery has
been fully charged and will fail to indicate correctly.
BATTERY INFORMATION
STATUS
self-examine
when power on
(No battery) Pre-charging
Charge
normally
Full
Charged
Error
LED
Orange
(for 1 second)
Green
Red light ashes
for 5 minutes
Red Green
Red ashes
for a long time
Charging Process:
5.
LED Indicator:6.
NOTE: An Error means the battery is too hot or cold, the battery has short-circuited, or the charger has
short-circuited.
Status LED
Standby (self-examine orange lights
1second when power on)
Pre-charging (pre-charging stage)
Charging
Full charged (charge in constant voltage)
Green light
Red light ashes for about 5 minutes
RED light for about 5.5 hours
Green light