User's Manual
7
3
If you plan to use an external speaker, choose a speaker with an
impedance of 8 Ω. The external speaker jack accepts a 3.5 mm (1/8")
mono (2-conductor) plug.
For voice communications, connect a microphone equipped with
an 8-pin modular plug into the modular socket on the front of the
main unit. Press rmly on the plug until the locking tab clicks. Attach
the supplied microphone hanger in an appropriate location using the
screws included in the screw set.
To untilize the QPS5888UV_S1 software, you must first connect
the transceiver to your PC then using an optional programming cable
PC50 (via Data socket ).
Please use QPS5888UV_S1 software for programming.
Initial Installation
EXTERNAL SPEAKER
MICROPHONE
PC CONNECTING
Ask your dealer about purchasing a Programming Cable PC51.
ACCESSORIES CONNECTIONS
SP-02
http://www.qxdz.cn
External speaker[SP-02]
Microphone[QHM-04]
Antenna[QCA-02]
NOTE
Microphone
connector
FCC WARNINGS AND STATEMENTS
IMPORTANT! Changes or modications to this unit not expressly approved
by Midland Radio Corporation could void your right to operate this
unit. Your radio is set up to transmit a regulated signal on an assigned
frequency. It is against the law to alter or adjust the settings inside the
communicator to exceed those limitations. Any adjustment to your radio
must be made by qualied technicians.