User's Manual

30
5888UV
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No. 54 menu. The LCD displays "PASSWD"
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted value.
4.
ON: Turn on password function.
OFF: Turn off password function.
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press
key or hold selector knob for over
0.5 second to store setup and exit.
PASSWORD FUNCTION
When password function is on, correct password shall be input after power
on The password shall be programmed before using this function.
7
General Setting
NOTE
BEEP VOLUME CONTROL
Press
1.
key to enter function menu.
Turn the Main band selector knob to choose No. 53 menu. The LCD
2.
displays “BP-VOL”
Press the Main band selector knob to enter function setup
3.
Switch the Main band selector knob to
4.
choose wanted value.
LOW: BEEP volume is low.
HIGH: BEEP volume is high.
Press the Main band selector knob or
5.
key to store value and
back to function menu.
Press
6.
key or hold selector knob for over 0.5 second to store
setup and exit.
VHF EXTERNAL SPEAKER PORT
When the function setup as external (EXT), an external Dual Track
speaker (SP-02) must be connected in order to hear the calling on VHF.
The calling from VHF and UHF are separated in 2 tracks.
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No. 52 menu. The LCD displays "VSPCONT"
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted value.
4.
INT: Internal speaker, VHF and UHF band share one speaker
EXT: External speaker, the calling on VHF
only audible through the external
Dual Track speaker.
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press key or hold selector knob for over
0.5 second to store setup and exit.