User's Manual
23
7
General Setting
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No 21 menu. The LCD displays "LOCK"
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted mode.
4.
ON: The keypad lockout function is turn
on all keys beside
and band switch
knob is valid.
OFF: The keypad lockout function is turn off.
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press key or hold selector knob for over
0.5 second to store setup and exit.
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No 22 menu. The LCD displays "LOCKT"
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted mode.
4.
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No 23 menu. The LCD displays "SQL"
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted value
4.
1-20: total 20 squelch levels
OFF: Turn of squelch function, the
background noise keep on.
Press the Main band selector knob or
5.
key to store value and .
Press key or hold selector knob for over 0.5 second to store setup
and exit.
With this function on, the transceiver will able to communicate with a
trans ceiver in same network without through a repeater.
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No 24 menu. The LCD displays "REV"
Press the Main band selector knob to enter function setup.
3.
KEYPAD LOCKOUT
TX OFF (PTT LOCKOUT)
SQUELCH LEVEL SETUP
TALK AROUND
short press, shot press this key , the sub band will
display "MAIN" and ashes.
ong press, choose scrambler group for Main band. In
standby, hold this key,the LCD displays SCR X and
icon.
X stands for the group number, repeater above operation to
choose wanted group.
7.
8.
BAND R, lock the right band PTT. Only able to transmit by left band.
BAND L, lock the left band PTT. Only able to transmit by right band.
BAND BOTH, lock both band PTT. Not
able to transmit by any side.
OFF: PTT no lock.
Press the Main band selector knob or
5.
key to store value and
back to function menu.Press key or hold selector knob for over
0.5 second to store setup and exit.