User's Manual
SHORTCUT OPERATIONS
Single-band Switching
CTCSS/DCS encode and decode
To reduce the interference from the sub-channel when the main channel be used.
You can use single-band switching function, turn off the sub-channel bands quickly.
In standby mode, press the
1.
button, the radio will display the PC channel,
and turn off the processor channel.
Click the
2.
button again, the radio will display the processor channel, and
turn off the PC channel.
Press the
3.
button again to return to dual-band show.
Press
1.
key then press [PF2] to enter into setup.
Press [PF2] key to choose CTCSS, DCS or OFF, when choose DCS, press
2.
key to select positive
or negative code.
Rotate Channel selector to choose desired CTCSS/DCS encode and decode.
3.
Press
4.
key or key to conrm and exit.