User's Manual

SHORTCUT OPERATIONS
CTCSS/DCS Scan
Press key, the top left corner of LCD displays " " icon, press key to
enter into CTCSS/DCS scan. Under this state, rotate channel switch to change scan
direction. When scan the matching CTCSS/DCS signaling, it will stay 5seconds and
then go on scanning. Press any other keys except
, , key to exit.
NOTE: When this function is on, user must setup 07th menu to be TONE option, then DTMF/5TONE/2TONE/
MSK can be used.
NOTE:
no setting CTCSS/DCS signaling.
In current channel, if signaling set as CTCSS, it will scan CTCSS, if sets as DCS, it will scan DCS.
Repeat above operation, LCD display "
2.
5TONE" and "
T
" icon, 5TONE signal add
in current channel.
Repeat above operation, LCD display "
3.
2TONE" and "
T
" icon, 2TONE signal add
in current channel.
Repeat above operation, LCD display "
4.
MSK" and "
T
" icon, MSK signal add in
current channel.(Version D)
Repeat above operation, LCD display "5. OFF", the "
T
" icon disappear, no optional
signal in current channel.
This function is invalid when radio works in professional mode or the arrow directed channel