User's Manual

04
How to Charge
1.Plug the AC adaptor into the AC outlet, then plug the cable of
AC adaptor into the DC jack, the indicator lights orange for 1s
and turns into GREEN---waits to charge.
2.Slide the battery or transceiver with battery into the charger;
make sure the battery terminals are in contact with the
charging terminals well. LED turns into twinkling RED---pre-
charging begins.
3.Pre-charging for about 5 minutes, LED twinkles stop then
charging begins.
4.It takes about 4 hours to fully charge the battery, when LED
turns into GREEN — full charged.
BATTERY INFORMATION
WARNING:
When keys or ornamental chains and other electric metals contact with the battery terminals, the battery
may cause damage or hurt bodies. If the battery terminal short circuit, it will generate a lot of heat, please
be careful when you bring or use the battery, please put battery or radio into insulated container. Do not put
it into metal container.
Do not recharge the battery if it is already fully charged. This may shorten the life of the battery or ▲
damage the battery.
Do not charge the battery or transceiver if it is damp. Dry it before charging to avoid danger. ▲