User's Manual
SAFETYTRAININGINFORMATION
Your Qixiang Electron Science & Technology Co., Ltd radio generates RF electromagnetic
energyduring transmitmode. This radio is designed for and classifiedas “OccupationalUse
Only”,meaning it mustbeusedonlyduringthecourse of employmentbyindividualsaware
ofthehazards,andthewaystominimizesuchhazards.
ThisradioisNOTintendedforuseby
the“GeneralPopulation”inanuncontrolledenvironment.
ThisradiohasbeentestedandcomplieswiththeFCCRFexposurelimitsfor“OccupationalUseOnly”.Inaddition,
yourQixiangElectronScience&TechnologyCo.,Ltdradio complies withthefollowingStandardsandGuidelines
withregardtoRFenergyandelectromagneticenergylevelsandevaluationofsuchlevelsforexposuretohumans:
FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating Compliance with FCC Guidelines for Human Exposure to
Radio Frequency Electromagnetic Fields.
American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with Respect to Human Exposure
to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.
American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the Measurement of Potentially
Hazardous Electromagnetic Fields– RF and Microwave.
T
heinformationlistedaboveprovidestheuserwiththeinformationneededtomakehimor
herawareofRFexposure,andwhattodotoas‐surethatthisradiooperateswiththeFCCRF
exposurelimitsofthisradio.
ElectromagneticInterference/Compatibility
During transmissions, your
Qixiang Electron Science & Technology Co., Ltd radio generates RF energy that can
possiblycauseinterferencewithotherdevicesorsystems.To avoidsuchinterference,turnofftheradioinareas
wheresigns arepostedto doso.DONOToperatethetransmitterinareasthataresensitiveto electromagnetic
radiation
suchashospitals,aircraft,andblastingsites.
Occupational/ControlledUse
The radio transmitter is used in situations in which persons are exposed as consequence of their employment
providedthosepersonsarefullyawareofthepotentialforexposureandcanexercisecontrolovertheirexposure.
Attention:
This radio complieswith IEEE and ICNIRP exposure limits for occupational/controlled RF exposure emvironment
at operating duty factors of up to 50% and is authorized by the FCC for occupational use only. An appropriate warning
lable is affixed to all units. In order to comply with RF exposure requirements, a minimum distance of 2.5cm must be
maintained when held-to-face, and body-worn operations are restricted to the approved original acessories (belt clip).
Do not use this device when antenna shows obvious damages