User's Manual
while connected.
7. In a MS Windows Explorer or Mac Finder window, locate the
Firmware folder in PD_Novel drive.
8. Unzip the downloaded update le into the
Firmware folder (qdutil
folder & contents).
9. Disconnect the microUSB from the device and wait for the device to
refresh.
10. On the Home screen, select
Sengs .
11. Select
Advanced Sengs Firmware Update select
to conrm update.
12. Wait as the device is updated and the update successful message
appears.
13. Turn the device off, and then slide the power switch and hold for 5
seconds to reboot.
14. Wait for the Home screen to be displayed.
15. Use
Sengs>Date and Time to reset the Date and Time according
to your location. Note: In order to connect with your Barnes & Noble
online account, these must be set correctly.
Restore to default
Restoring the defaults using this option changes all general settings
back to the factory pre-set defaults. Your downloaded media, contact
list, photos, etc. are not affected.
1. On the Home screen, select Sengs .
2. Select
Advanced Sengs Restore to default.
3. Select to conrm the reset.
Restore to default and remove user information