User's Manual
Table Of Contents
- 1 Read This First
- 2 Safety Information
- 3 Overview
- 4 Preparing the System
- Inserting a microSD Card
- Using the Stand
- Charging the System
- Connecting the Transducer
- Removing the Transducer
- Using the System On The Go
- Using the Wheel Brakes
- Placing the Transducer Holder
- Mounting the System to the System Cart
- Adjusting the System Cart Height
- Connecting an External Printer
- Tilting the System
- Unmounting the System From the System Cart
- Moving the System
- Outputting the System Display to an HDMI-Enabled TV or Monitor
- Supported External Printers
- 5 Using the System
- Turning On/Off the System
- Logging Into the System
- Launching the Main Screen
- Setting the System Time and Date
- Controlling the System
- Setting the System Language
- Identifying the Main Screen Layout
- Switching the Control Panel Pages
- Managing the System Power
- Managing Disk Space
- Network Configuration
- DICOM Configuration
- 6 Performing an Exam
- Starting a New Exam
- Adding a New Patient
- Loading a Worklist
- Selecting a Preset
- Setting the Transducer Orientation
- Selecting/Switching a Scan Mode
- Adjusting the Displayed Image
- Freezing an Image
- Adding Annotations
- Adding Measurements
- Saving and Printing the Image
- Reviewing the Image
- Exporting the Exam
- Managing the Exam List
- Ending the Exam
- 7 Using Image Controls
- 2D Mode Image Controls
- Overview
- Adjusting Gain
- Adjusting Frequency
- Adjusting Time Gain Compensation (TGC)
- Adjusting the Scan Depth
- Adjusting the Focus Depth, Focal Zone and Focal span
- Adjusting Dynamic Range
- Using Tissue Harmonic Imaging (THI)
- Adjusting Persistence
- Adjusting Sharpness and Smoothing
- Adjusting Gray Map
- Adjusting Chroma Map
- Adjusting Steer Angle
- Adjusting the Sector Width and Position
- Adjusting Power
- Using Trapezoidal Imaging
- Adjusting Density
- Using Compound Imaging
- Using ENV (Enhanced Needle Visualization)
- Color/CPA Mode Image Controls
- M-Mode Image Controls
- Spectral Doppler Mode Image Controls
- 2D Mode Image Controls
- 8 System Customization and Service
- Customizing Your System
- Configuring Security Policies
- Servicing your system
- Reinstalling Software
- Checking the Software Version
- Checking the System’s Serial Number
- Checking the Tablet’s Serial Number
- Checking the License Status
- Resetting User Settings
- Backing Up System Settings and Patient Data
- Restoring System Settings and Patient Data
- Resetting Your System
- Testing the System
- Exporting System Logs
- Reading the User Manual
- 9 Transducers
- 10 Transducer Care
- 11 System Maintenance
- 12 Appendix
29
eie
System Overview
InnoSight Ultrasound System
P6992-4, EN, 16/12/6
System Overview
Front and Side Views
3
5
4
6
8
10
7
11
12
1
2
2
9
No. Component Function
1
Touch screen
Display system information and allow you to perform operations using
different gestures
2
Speakers Built-in speakers for playing sounds, which are software-controlled
3
Transducer
connection socket
Connect a transducer to the system (See page 42)
4
Battery indicator
When the system is turned off and connected to power, the battery
indicator behaves in the following lighting patterns:
Steadily on orange when the battery is charging
Steadily on green after the battery is charged
When the system is turned on and connected to power, the battery
indicator lights off To monitor the battery level, see Battery Status
Icons on page 64
5
Power indicator Blink blue after the system enters Sleep mode (See page 64)
6
MicroSD card slot
Insert a microSD card into the microSD card slot to exchange data from/
to the system (See page 39)
7
AU port For use by authorized service personnel only
8
HDMI port
Connect the system to an HDMI (High-Definition Multimedia Interface)
device (See page )
9
Ethernet socket Connect the system to an Ethernet-based network (See page 6)
10
USB 2 port
Connect the system to USB 2/3 devices, such as keyboards, pointing
devices, or portable storage devices
11
USB 3 port
12
Headphone jack Connect the system to an audio device, such as headphones or speakers