User's Manual
Table Of Contents
- 1 Read This First
- 2 Safety Information
- 3 Overview
- 4 Preparing the System
- Inserting a microSD Card
- Using the Stand
- Charging the System
- Connecting the Transducer
- Removing the Transducer
- Using the System On The Go
- Using the Wheel Brakes
- Placing the Transducer Holder
- Mounting the System to the System Cart
- Adjusting the System Cart Height
- Connecting an External Printer
- Tilting the System
- Unmounting the System From the System Cart
- Moving the System
- Outputting the System Display to an HDMI-Enabled TV or Monitor
- Supported External Printers
- 5 Using the System
- Turning On/Off the System
- Logging Into the System
- Launching the Main Screen
- Setting the System Time and Date
- Controlling the System
- Setting the System Language
- Identifying the Main Screen Layout
- Switching the Control Panel Pages
- Managing the System Power
- Managing Disk Space
- Network Configuration
- DICOM Configuration
- 6 Performing an Exam
- Starting a New Exam
- Adding a New Patient
- Loading a Worklist
- Selecting a Preset
- Setting the Transducer Orientation
- Selecting/Switching a Scan Mode
- Adjusting the Displayed Image
- Freezing an Image
- Adding Annotations
- Adding Measurements
- Saving and Printing the Image
- Reviewing the Image
- Exporting the Exam
- Managing the Exam List
- Ending the Exam
- 7 Using Image Controls
- 2D Mode Image Controls
- Overview
- Adjusting Gain
- Adjusting Frequency
- Adjusting Time Gain Compensation (TGC)
- Adjusting the Scan Depth
- Adjusting the Focus Depth, Focal Zone and Focal span
- Adjusting Dynamic Range
- Using Tissue Harmonic Imaging (THI)
- Adjusting Persistence
- Adjusting Sharpness and Smoothing
- Adjusting Gray Map
- Adjusting Chroma Map
- Adjusting Steer Angle
- Adjusting the Sector Width and Position
- Adjusting Power
- Using Trapezoidal Imaging
- Adjusting Density
- Using Compound Imaging
- Using ENV (Enhanced Needle Visualization)
- Color/CPA Mode Image Controls
- M-Mode Image Controls
- Spectral Doppler Mode Image Controls
- 2D Mode Image Controls
- 8 System Customization and Service
- Customizing Your System
- Configuring Security Policies
- Servicing your system
- Reinstalling Software
- Checking the Software Version
- Checking the System’s Serial Number
- Checking the Tablet’s Serial Number
- Checking the License Status
- Resetting User Settings
- Backing Up System Settings and Patient Data
- Restoring System Settings and Patient Data
- Resetting Your System
- Testing the System
- Exporting System Logs
- Reading the User Manual
- 9 Transducers
- 10 Transducer Care
- 11 System Maintenance
- 12 Appendix
InnoSight Ultrasound System
Servicing your system
eiinndeie
14
P6992-4, EN, 16/12/6
Resetting User Settings
Performing this action will reset all system settings of the current user and is irreversible Consider backing
up your settings to an external storage device first
Touch System Management > (System Configuration) > (Reset Configuration) > Reset
Backing Up System Settings and Patient Data
Before backing up system settings and patient data, ensure that the system is connected to an
external storage device
It is recommended that you perform regular backups on system settings and patient data to
prevent data loss
1 Touch System Management
2 In the System Configuration section, touch Backup in the following fields:
Backup System Settings & Patient Data: All the system settings, presets and exams are saved to the
external storage device The following file naming convention is applied to the backup file:
BackupYYYYMMDDHHMMSS
Backup Patient Data: All the exams are saved to the external storage device The following file
naming convention is applied to the backup file:
BackupPATIENTYYYYMMDD
Restoring System Settings and Patient Data
Before restoring system settings and patient data, ensure that the system is connected to an
external storage device containing stored system settings and patient data
1 Touch System Management
2 In the System Configuration section, touch Restore in the following fields, and select a backup file:
Restore System Settings & Patient Data: All the system settings, presets and exams are restored to
the system from the external storage device
Restore Patient Data: All the exams are restored to the system from the external storage device
Resetting Your System
This action is irreversible Consider backing up your up system settings and patient data to an
external storage device first
Performing this action will restore your system to its factory state and erase all your user settings and
patient data from the system storage
Touch System Management > (System Configuration) > (Factory Reset) > Erase
Testing the System
The system provides diagnostic tools to examine all the functionality of the system components However,
these operations may require assistance from technical support (See Customer Service on page 3)
Touch Test & Utilities > (System Test) > (Test mode)