User's Manual
Table Of Contents
- 1 Read This First
- 2 Safety Information
- 3 Overview
- 4 Preparing the System
- Inserting a microSD Card
- Using the Stand
- Charging the System
- Connecting the Transducer
- Removing the Transducer
- Using the System On The Go
- Using the Wheel Brakes
- Placing the Transducer Holder
- Mounting the System to the System Cart
- Adjusting the System Cart Height
- Connecting an External Printer
- Tilting the System
- Unmounting the System From the System Cart
- Moving the System
- Outputting the System Display to an HDMI-Enabled TV or Monitor
- Supported External Printers
- 5 Using the System
- Turning On/Off the System
- Logging Into the System
- Launching the Main Screen
- Setting the System Time and Date
- Controlling the System
- Setting the System Language
- Identifying the Main Screen Layout
- Switching the Control Panel Pages
- Managing the System Power
- Managing Disk Space
- Network Configuration
- DICOM Configuration
- 6 Performing an Exam
- Starting a New Exam
- Adding a New Patient
- Loading a Worklist
- Selecting a Preset
- Setting the Transducer Orientation
- Selecting/Switching a Scan Mode
- Adjusting the Displayed Image
- Freezing an Image
- Adding Annotations
- Adding Measurements
- Saving and Printing the Image
- Reviewing the Image
- Exporting the Exam
- Managing the Exam List
- Ending the Exam
- 7 Using Image Controls
- 2D Mode Image Controls
- Overview
- Adjusting Gain
- Adjusting Frequency
- Adjusting Time Gain Compensation (TGC)
- Adjusting the Scan Depth
- Adjusting the Focus Depth, Focal Zone and Focal span
- Adjusting Dynamic Range
- Using Tissue Harmonic Imaging (THI)
- Adjusting Persistence
- Adjusting Sharpness and Smoothing
- Adjusting Gray Map
- Adjusting Chroma Map
- Adjusting Steer Angle
- Adjusting the Sector Width and Position
- Adjusting Power
- Using Trapezoidal Imaging
- Adjusting Density
- Using Compound Imaging
- Using ENV (Enhanced Needle Visualization)
- Color/CPA Mode Image Controls
- M-Mode Image Controls
- Spectral Doppler Mode Image Controls
- 2D Mode Image Controls
- 8 System Customization and Service
- Customizing Your System
- Configuring Security Policies
- Servicing your system
- Reinstalling Software
- Checking the Software Version
- Checking the System’s Serial Number
- Checking the Tablet’s Serial Number
- Checking the License Status
- Resetting User Settings
- Backing Up System Settings and Patient Data
- Restoring System Settings and Patient Data
- Resetting Your System
- Testing the System
- Exporting System Logs
- Reading the User Manual
- 9 Transducers
- 10 Transducer Care
- 11 System Maintenance
- 12 Appendix
11
eiinndeie
Customizing Your System
InnoSight Ultrasound System
P6992-4, EN, 16/12/6
Label List: Touch Edit, select an application and check/uncheck each label to re-arrange the label list,
then touch Save
Body Mark
Default Body Mark for Application: Touch Edit, select an application and touch a desired body mark to
set it as default, then touch Save
Body Mark List: Touch Edit, select an application and enable/disable each body mark to re-arrange the
body mark list, then touch Save
Measurement
User Defined Measurement List/User Defined Calculation List: Customize measurements/calculations
Touch Edit Select a scan mode to display its available measurements/calculations
» To add a new measurement/calculation, touch New, or use existing measurement types/equations
by selecting a measurement/calculation and touching Copy Edit the measurement/calculation name
and measurement types/equations using the Properties buttons, then touch Apply
» To edit or delete a customized measurement/calculation, select the measurement/calculation and
touch Edit or Delete
Configuration of Calculation List: Touch Edit and check/uncheck each item to re-arrange the calculation
list, then touch Save
Result Unit: Set the measurement unit
Caliper Size/Set Result Font Size: Select options
Show Measure Line: Enable showing the measuring lines while performing a measurement
Result Position: Set the position of the measured results
Show Result: Set whether to show all or the last measured results, or to hide them all
Report
Default Report Template: Set the default report template based on the application selected
Built-in Prompt String/Built-in Finding String/Built-in Comment String: Touch Edit, then edit or add
built-in strings used in the report
Report Display: Touch Edit, and select the display unit of the Calculation Package in the report
DICOM
Configure DICOM settings For more information, see DICOM Configuration on page 66
Networking
Display the network connection status of the system in the Information window
» Current Status: The IP address currently connected
» Detailed Status: All the IP addresses and MAC addresses connected
Configure the system network
» WLAN Configurations: See Connecting the System to the Wireless Network on page 6
» Ethernet Configurations: See Connecting the System to the Network by Ethernet on page 6