User's Manual
Table Of Contents
- 1 Read This First
- 2 Safety Information
- 3 Overview
- 4 Preparing the System
- Inserting a microSD Card
- Using the Stand
- Charging the System
- Connecting the Transducer
- Removing the Transducer
- Using the System On The Go
- Using the Wheel Brakes
- Placing the Transducer Holder
- Mounting the System to the System Cart
- Adjusting the System Cart Height
- Connecting an External Printer
- Tilting the System
- Unmounting the System From the System Cart
- Moving the System
- Outputting the System Display to an HDMI-Enabled TV or Monitor
- Supported External Printers
- 5 Using the System
- Turning On/Off the System
- Logging Into the System
- Launching the Main Screen
- Setting the System Time and Date
- Controlling the System
- Setting the System Language
- Identifying the Main Screen Layout
- Switching the Control Panel Pages
- Managing the System Power
- Managing Disk Space
- Network Configuration
- DICOM Configuration
- 6 Performing an Exam
- Starting a New Exam
- Adding a New Patient
- Loading a Worklist
- Selecting a Preset
- Setting the Transducer Orientation
- Selecting/Switching a Scan Mode
- Adjusting the Displayed Image
- Freezing an Image
- Adding Annotations
- Adding Measurements
- Saving and Printing the Image
- Reviewing the Image
- Exporting the Exam
- Managing the Exam List
- Ending the Exam
- 7 Using Image Controls
- 2D Mode Image Controls
- Overview
- Adjusting Gain
- Adjusting Frequency
- Adjusting Time Gain Compensation (TGC)
- Adjusting the Scan Depth
- Adjusting the Focus Depth, Focal Zone and Focal span
- Adjusting Dynamic Range
- Using Tissue Harmonic Imaging (THI)
- Adjusting Persistence
- Adjusting Sharpness and Smoothing
- Adjusting Gray Map
- Adjusting Chroma Map
- Adjusting Steer Angle
- Adjusting the Sector Width and Position
- Adjusting Power
- Using Trapezoidal Imaging
- Adjusting Density
- Using Compound Imaging
- Using ENV (Enhanced Needle Visualization)
- Color/CPA Mode Image Controls
- M-Mode Image Controls
- Spectral Doppler Mode Image Controls
- 2D Mode Image Controls
- 8 System Customization and Service
- Customizing Your System
- Configuring Security Policies
- Servicing your system
- Reinstalling Software
- Checking the Software Version
- Checking the System’s Serial Number
- Checking the Tablet’s Serial Number
- Checking the License Status
- Resetting User Settings
- Backing Up System Settings and Patient Data
- Restoring System Settings and Patient Data
- Resetting Your System
- Testing the System
- Exporting System Logs
- Reading the User Manual
- 9 Transducers
- 10 Transducer Care
- 11 System Maintenance
- 12 Appendix
InnoSight Ultrasound System
Customizing Your System
eiinndeie
1
P6992-4, EN, 16/12/6
Body mark
Auto-clear Body Mark after Unfreeze: Enable clearing the body mark added automatically after
returning to the real-time scan
Auto-add Body Mark after Live Scan: Enable adding a body mark each time you start a new scan
Annotation
Auto-clear Annotation after Unfreeze: Enable clearing all the annotations added automatically after
returning to the real-time scan
Measurement
Auto-clear Measurement after Unfreeze: Enable clearing all the measurements added automatically
after returning to the real-time scan
Continue Next Measurement: Enable initiating a second measurement automatically after the first one
is complete
Exam
Screen after End Exam: Select the screen to enter after touching End Exam
Export DICOM after End Exam: Enable exporting data via DICOM automatically after touching End
Exam
Print
Print while Save: Enable printing out the scanned image automatically after touching Save
Function ey
The system provides a function (configurable) key for quick access to your frequently used action
Function Key Actions: Touch Edit, assign a desired action to the function key, then touch Save
Function Key Display Name: Edit the name for the function key
Imaging
Auto Focus by following CROI/Auto CROI by following SV: Enable re-positioning ROI to the center of
the image automatically upon entering Color/CPA/PW/CW modes
Auto Zoom-in Image for PW/CW Mode/Auto Zoom-in Ratio: Enable zooming-in images automatically
with the assigned ratio upon entering PW/CW modes To change the zoom ratio, select a desired
percentage
Image format: Select the scanned image format
Cine Loop Length in Seconds (Length may vary depending on frame rate): Set the cine loop length for
each recording
PW Output Unit/CW Output Unit: Set the velocity display unit in PW/CW modes
Display Layout
M Mode Display Format/PW Mode Display Format/CW Mode Display Format: Set the aspect ratio
between the 2D imaging window and the time series window on the imaging screen
Annotation
Annotation Font Size/Arrow Size: Select a desired size