User`s guide

Inserting and Removing Cards
All Card Types
• Insert cards straight into the slots
• Do not force a card into a slot, as you may damage the card or
the slot connector
• Do not remove memory cards from Qio MR while data is
being written or read; otherwise data on the memory card
may be corrupted
Inserting/Removing SxS Media and ExpressCard/34 Adapters
• To insert a card, push it into the slot until it “clicks” into place
• Before removing any SxS memory card, be sure to “eject” it
first by clicking it in the taskbar and selecting Safely Remove
Hardware > Safely remove Sony SxS…; otherwise, data on the
memory card may be corrupted
• Before removing any ExpressCard/34 adapter, be sure to
“eject” it first by clicking it in the taskbar and selecting Safely
Remove Hardware
• To remove a card, push it further into the slot until it “clicks”
again; the card will be ejected
• Do not pull out a card without first pushing it in; the next
card you insert into the slot will be ejected immediately and
may cause a problem
• If you are using an ExpressCard adapter to which you connect
cables, always connect the cables to the adapter card before
inserting it into the Qio MR chassis’ slot
Inserting/Removing P2 Media
• To insert a card, push it into the slot until it stops; the eject
button next to the slot will pop out
• Before physically removing a P2 memory card, be sure to
“eject” it first by clicking it in the taskbar and selecting
Safely Remove Hardware > Safely remove Panasonic P2 Card;
otherwise, data on the memory card may be corrupted
• To remove a P2 card, push in the eject button next to the slot
6
Chapter 4 – Memory Card and Adapter Card Use
Only change the write protect switch
position when the card is not inserted into the
Qio MR
Inserting/Removing CF (CompactFlash) Cards
• To insert a card, push it into the slot until it stops
• In order for your computer to recognize CF cards after insertion into
the Qio MR, you must open Device Manager (click Start, and then
right-click Computer > Manage. In the left-hand pane, click Device
Manager) and then from the menu select Action > Rescan Disks
• To remove a CF card, pull it straight out of the slot
• After removing a CF card, open Device Manager and select
Action > Rescan Disks to refresh the system’s inventory of disks
SxS and P2 Memory Card Write Protect Switches
SxS and P2 memory cards have write protect switches. When set
to the “WP” or “PROTECT” position, saving, editing and deleting
data are disabled. Do not change the switch positions on SxS or
P2 cards when they are in the Qio MR. If you need to change
the switch position, follow the instructions on card removal as
previously described, pull the card out of its slot, change the
card’s switch position, and then reinsert the card into its slot.
WARNING: Do not “eject“ CF cards (selecting Safely
remove… from the taskbar); otherwise, the Qio MR
may become disabled. Some CF cards are seen as non-
removable disks. Ejecting these cards by this method will cause
the entire Qio MR (and any cards inserted or drives attached) to
eject. If you did eject a CF card by choosing Safely remove from
the taskbar, restart your computer to restore functionality to the
Qio MR.