User's Manual

2.4GHz AV Transmitter
Power adapter
AV output device
Sound card
Speaker
AV output device
Laptop
423
LINE
OUT
USB
MMI
2.4GHz
ANT
Connection and operation
Product placing and retransmitting
2. Connection and operation
2.1 UTV324 connection illustration
Note: Refer to Part4 (software instruction) to get UTV324 operation manual.
Antenna
2.2 TXV2408 connection illustration and panel operation instruction:
Rear panel:
Antenna
Antenna
Rear IR transmitting
equipment
1)
2)
(STB/DVD...)
6. Product placing and retransmitting
6.1 Transmitter TXV2408 placing
CATV watching:
When watching CATV, you only need to connect power to CATV signal
and place the unit in the proper position. Make sure no obstacle around.
A/V devices like DVD, STB watching:
Method one: Use the front IR transmitting device
Put the transmitter onto the A/V device and make sure IR transmitting
sensor is 2-3 cm forward, right towards the IR receiver sensor of the
A/V device.
Left view
Front view
(STB/DVD...)
IR-DVD remote sensor
Note:
Generally there is “infrared remote control” or “IR” on the IR receiving
sensor of STB or DVD, please put the IR transmitting sensor towards
it.
There are two IR remote sensors (respectively front and rear) as below:
Rear IR remote sensor
Front IR remote sensor