Instructions

2)Afterthefirmwareisupdated,Qingping+appwillremindyoutodeletetheproduct
andadditbackagain: 
Pleasefollowthebelowsteps:
i.DeletetheproductfromQingping+.
ii.Resettheproducttoitsfactorysettings:pressandholdthebuttononthebackofthe
product,andreleaseafterthescreendisplays ” 188 ” ,waitfortheproductreturntodisplay
normaltemperatureandhumidityreadings,thentheproductisresettofactorysettings.
iii:AddtheproductinQingping+.
Afterre-addingtheproduct,itshouldworknormally.Ifit'snot,pleaseemailus:
[e-mail](no"m"attheend).
Cannotconnecttotheproduct
2.