Installation & Operation Guide

Page 10
LOCKING/UNLOCKING/PASSWORD PROGRAMMING
Using valid Finger user
Using valid Card （This function is not available for the US market.）
Using APP
TO LOCK THE LOCK
2.1 Using Keypad: Enter press key.
2.2 Setting Automatic Lock ( 1-30 second) Default 10 second
1. Programming mode
CHANGE CURRENT OR RE-SET ADMINISTRATOR PASSWORD
Factory default Programming Code = 123456
In programming mode, there is a voice prompt:
"Password management please press 1 ",
"Fingerprint management please press 2",
"IC card management please press 3",
"Change the administrator password please press 4",
"
Set the automatic lock time please press 5",
"Turn on or off Bluetooth please press 6"
Return press
2.1. Password programming
Press 1 to get into programming mode.
Voice navigation "Add password please press1",
"Delete password please press2",
"Clear the password please press 3",
"Return please press key"
2.1.1) Add password
Press 1 to add password.
Voice navigation "Please enter the user number ",
key