User's Manual

Yeelight LED Light Bulb (White)
User Manual
Please read this manual carefully
before using the product
Product Warranty Statement
List of Functional Faults
Warranty Exclusions
Visit Xiaomi's after-sales service site at http://fuwu.mi.com
Or call Xiaomi customer service number 400-100-5678 for after-sales issues.
Standard Compliance: Q/QDYLK0001 -2015
Manufacturer: Qingdao Yeelink Information Technology Co., Ltd.
Customer Service Number: 400-100-5678
Basic Parameters
Installation Steps
How To Restore Factory Settings
Notes:
Download the Mobile Client
Yeelight LED Light Bulb (White) Warranty Certificate
Working Environment: -10~+40℃/0%~85%RH
Rated Input: 120V~60Hz 150mA
Rated Power: 8 watts
Lamp Interface: E26
Communication Mode: Wi-Fi 2.4GHz
Size: 55×120 mm
Service Life: approx. 25,000 hours
Color Temperature: 2700K
Luminous Flux: 600 lumens
Install the light bulb and switch on the power.
Install the Light Bulb
Customer name (Mr/Ms) Tel.
Customer address
Product Model Serial number
Store of purchase
Purchase date
Store address
Invoice No.
Run the mobile client
Open the app and operate it in accordance with the
instructions provided in the app.
Make sure that your Wi-Fi connection is working.
*
Safety Instructions
The light bulb blinks abnormally
App cannot connect with the light bulb
App cannot turn on/off the light bulb or adjust its brightness
Purchaser
Seal
Yeelight LED Light Bulb (White) is covered by Xiaomi's quality warranty in accordance with
the Law of the People's Republic of China on Protection of Consumer Rights and Interests
and the Product Quality Law of the People's Republic of China as follows:
1. If any of the faults included in the List of Functional Faults occurs within 7 days of receiving the
product, the customer can choose to return the product or get a replacement free of charge
subject to the determination of Xiaomi's after-sales service center following an inspection;
2. If any of the faults included in the List of Functional Faults occurs between the 8th and the 15th
day of receipt of the product, the customer can get a replacement or have the product repaired
free of charge, subject to the determination of Xiaomi's after-sales service center following an
inspection;
3. If any of the faults included in the List of Functional Faults occurs within 12 months of receipt of
the product, the customer can choose to have the product repaired for free subject to the
determination of Xiaomi's after-sales service center following an inspection.
Light bulb does not come on when connected to power.
Functional
Faults
Malfunction that affects use or safety due to compromised product
structure (other than caused by user)
Address: B4, Floor 10, Tower B, International Innovation Park, 1 Ke Yuan
Wei Yi Lu, Laoshan District, Qingdao, China
1. Unauthorized repair, damage from misuse, external impact, negligence,
abuse, exposure to liquid, accident or tampering, removal, obliteration of
labels or anti-fake marks;
2. Expiration of the warranty period;
3.
Any damage due to force majeure;
4. Any situation not included in the List of Functional Faults;
5. Any situation not included in the List of Functional Faults, such as
functional faults attributable to the use of light modulator, use at an
unappropriated voltage or in an unappropriated environment.
1. Make sure that the power is off when installing,
removing or examining the light bulb.
2. Do not use this product in a lamp with a light
modulator to avoid damage to the product.
(such as a table lamp with a light modulator)
3. Do not use the product in a wet environment.
4. Using the light bulb in a narrow ill-ventilated tube
lamp shade is not recommended because this may
cause weak signals or heat dissipation issues.
Before use, please make sure that your voltage is appropriate to the
product's working voltage. Using the product at a voltage other than the
specified one may damage the product and create safety hazards.
Do not disassemble the product.
The light bulb will heat up during working. Do not use it in a confined
holder for an extended length of time. Make sure that the light bulb works
in a setting with cross-ventilation to facilitate heat dissipation.
Turn on and off the switch (not the mobile client app on/off
button) continuously for 5 times. The light will be in the
breathing mode. After 5 seconds, it will automatically restart
with factory settings.
You can buy more smart products on
MI.COM, or directly from Mi Smart
Home mobile client.
Search "Mi Home" in Mi App Store or scan the QR code below to
download the Mi Smart Home mobile client.
This product supports Mi Smart Home system and can be controlled by sliding on the
locked MIUI screen and interact with other Mi Smart Home enabled products.
The Warranty Certificate can be cut off along the dotted line
Yeelight LED Light Bulb (White) Warranty Certificate
Customer name (Mr/Ms) Tel.
Customer address
Product Model Serial number
Store of purchase
Purchase date
Store address
Invoice No.
Purchaser
Seal
Type: YLDP01YL
FCC COMPLIANCE STATEMENT
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
To satisfy FCC RF Exposure requirements for this transmission devices, a
separation distance of 20cm or more should be maintained between the
antenna of this device and persons during operation. To ensure compliance,
operation at closer than this distance is not recommended. The antenna(s)
used for this transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter. Changes or modifications not
expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.