User's Manual

Doris Pro(美国版)
比例：按标注尺寸为准 单位：mm
说明书
P0
2021-04-30
设计师
赵寅钧
产品经理
质量工程师
色相正确、印迹牢固、
套印准确、各色套印
不露杂色，套印误差≤ 0.1mm
印刷+联机过油+裁切+骑马钉
金东太空梭105g无光铜
模切走位≤±0.5mm
PT Cool Gray 11C
Night mode
02 More features
Set your own night mode in the app. The lamp will turn on
automatically with cozy nightlight during the preset night mode
period. If not in the preset period, the lamp will return to the
default state saved in the APP.
* The Night Mode is off by default. Please activate it in Yeelight APP.
1. The wireless charging indicator will flash 3 times when the lamp is
connected to the power supply with its original adaptor.
2. Put the mobile phone in the wireless charging area. The mobile
phone is charging when yellow indicator light is on. If not, please
adjust the phone to proper position.
3. When the phone is fully charged, the yellow indicator light is off
and the wireless charging terminates.
Instructions
01 ON/OFF buon
Wireless charging indicator
Product Description
Lamp cap
Lamp arm
Base
ON/OFF
Wireless charging area
Wireless charging indicator
Wireless charging area
Wireless charging
Installation
Plug the adaptor connector into the DC ternimal, then connect the power.
Yeelight Staria Bedside Lamp Pro
User Manual
1. Open the Home APP in your iPhone or iPad.
2. Tap "Add Accessories" and follow the instructions in the app to scan the QR code in the user manual
or on the product base, or enter the 8-digit setup code above the QR code to grant the Apple Home app
access.
*
Make sure the Wi-Fi network is available and you can get access to the internet normally. This product
is not compatible with 5G network.
* To ensure proper Homekit compatibility, it is recommended to use iOS 9 or above;
* HomeKit codes are indicated under the base of lamp. Please be noted that HomeKit codes are required
for reset every time.
Apple is the trade mark of Apple LLC.
* Please reset the lamp before using it in a new network environment .
How to Reset
Tap and hold the ON/OFF buon, and re-insert the adaptor connector into
the DC termnial till the light is breathing, and then release the ON/OFF buon.
03 Apple HomeKit Smart Control
Wireless charging indicator status
Power on: the indicator flashes 3 times
Charging: indicator on
Charging completed or not charging: indicator off
Error warning: the indicator flashes quickly
Foreign object: the indicator flashes quickly
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
To satisfy FCC RF exposure requirements, a separation distance of 20 cm or more should be
maintained between the antenna of this device and persons during device operation.
To ensure compliance, operations at closer than this distance is not recommended.
Limited by local law regulations, version for North America does not have region selection option.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Model No.: YLCT03YL
Operating temperature: -10 ~ 35°C
Operating humidity: 0%-85%RH
Color temperature : 2700 K-6000 K
Wireless charging output:10W MAX
Wireless charging distance: ≤3.5mm
Compatible with: Android 4.4 & iOS9.0
and above
Compatible with: Android 4.4 & iOS9.0
and above
Product Features
Basic Parameters
Name : Yeelight Staria Bedside Lamp Pro
Rated input: 100 -240V~50/60Hz 0.45A
Rated Power: 18W(Wireless Charging
Module+LED modules)
CRI: Ra95
Input: 12V 1.5A
Power factor: 0.5
Wireless connection: Wi-Fi IEEE 802.11 b/g/n
2.4GhZ
FCC ID: 2ABEU-YLCT03YL
Contains FCC ID: 2AC7Z-ESPWROOM32D
Adjustable color
temperature
Adjustable
brightness
Foreign object
detection
Personalized
schedule
10W fast
charging
Voice control
Cozy nightlight
Smart timer
Warnings
EU Declaration of Conformity
Check the voltage before using the product. Improper voltage may damage the product
and cause potential safety hazards.
The light source contained in this luminaire shall only be replaced by the manufacturer or
his service agent or a similar qualified person.
The light will produce heat during operation. Please keep proper ventilation.
Using adapters other than the original one may cause product damage or safety hazards.
Do not tilt the lamp but place it smoothly.
potential safety hazard.
* All the pictures shown in this manual are for reference only.
Hereby, Qingdao Yeelink Information Technology Co., Ltd., declares that the radio equipment
type YLCT03YL is in compliance with Directive 2014/53/EU.
WEEE Disposal and Recycling Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as
in directive 2012/19/EU) which should not be mixed with unsorted household waste.
Instead, you should protect human health and the environment by handing over your waste
equipment to a designated collection point for the recycling of waste electrical and electronic
equipment, appointed by the government or local authorities.
Please contact the installer or local authorities for more information about the
location as well as terms and conditions of such collection points.
For household use only.
Class III Luminaire.
Learn more at www.yeelight.com
Customer service: [e-mail]
Manufactured by: Qingdao Yeelink Information Technology Co., Ltd.
Address: F10-B4, Building B, Qingdao International Innovation Park, No. 1 Keyuan Weiyi Road, Laoshan
District, Qingdao City, 266101, Shandong Povince, China
YLCT03YL 1.0
HomeKit
设置码