User's Guide

4241
IPD Adjustment
To ensure image clarity, it is necessary to line up the lenses with the distance
between your pupils (IPD).
There are three lens spacing settings—58mm, 63.5mm, and 69mm. To adjust the
IPD, gently move both lenses inward or outward to find the clearest setting.
• Head Control Mode
If the Controller is not connected, you can interact with the home screen by
moving your head to direct the crosshairs over your intended selection and
clicking the HOME, CONFIRM, and BACK buttons on the VR Headset.
• Screen re-centering
hold the HOME button of the Controller for more than second to re-center
the screen.
• Audio volume adjustment
eht nwod nrut ro pu nrut ot tesdaeH RV eht fo nottub EMULOV eht esu nac uoY
volume. Press it to continuously adjust the volume.
• VR Headset reset
If the picture in the VR Headset is stuck, or the VR Headset does not respond af-
ter short-pressing the HOME
or
POWER buttons,
pre-
-ssing
reboot the VR Headset by
the POWER button on
the VR Headset for more than ten seconds.
• Sleep/Wake up
Option 1 Proximity Sensor:
waking up.
Option 2 POWER Button:
Press the POWER button for manual sleeping or waking up.
•
58<-63.5->69(mm)