Installation Instructions
The heart rate sensor monitors your heart rate during
sports. It supports ANT+ and Bluetooth wireless
protocols, allowing you to send heart rate data to a
mobile app, bike computer, sports watch, or any other
smart device that supports standard ANT+ and Bluetooth
protocols. By recording each and every heartbeat, it
enables scientific and pleasant training.
1. Wet the electrode areas on the reverse side of the strap.
2. Press the snap studs on the sensor into the snap
sockets on the strap, respectively. Be sure to place the
heart rate sensor in the proper direction.
3. Wrap the strap around your chest and attach the
hook to the other end of the strap.
4. Move the sensor to just below your chest and let
the electrodes contact your skin.
Placement Illustration for Men Placement Illustration for Women
5.After the sensor is properly worn, it will
automatically turn on, select the correct ANT ID or
Bluetooth ID on the bike computer, watch, and
APP, and the heart rate data will be transmitted.
Left Right
20136-169
ANT ID、Bluetooth ID
Model:H003