User's Manual

2
Label
Host labeling requirement:”Contains transmitter module FCC ID: 2AJVQ-7618BUPT”.
Host labeling requirement:”Contains transmitter module IC: 22470-7618BUPT”.
2．Product Information
2.1 Product Information
ZDGF7618BU-PT Wi-Fi USB module is a wireless signal module device work at 2.4GHz(2.400 ~
2.4835GHz)/5GHz (5.150 ~ 5.85GHz) .ZDGF7618BU-PT comply with IEEE 802.11a、802.11b、802.11 g 、802.11
n and 802.11 ac standard. It support up to 867Mbps physical layer transmitting rate. ZDGF7618BU-PT support USB
2.0, which has up to 480Mbps data rate.
ZDGF7618BU-PT has 2T2R structure，has two onboard PIFI Antenna. It could provide stable wireless link with
high throughput.
ZDGF7618BU-PT is a wireless Wi-Fi signal module. It could transmit and receive Wi-Fi wireless signal device
without radar detection It is widely used to multi-media device, such as smart TV.Equipped with
ZDGF7618BU-PT, a smart TV could access to Wireless Local Network, which is also called WLAN or WIFI
network. ZDGF7618BU-PT helps multi-media device achieve to send & receive data package in a wireless way.
2.2 Feature
●IEEE standard：IEEE 802.11a/b/g/n/ac client device without radar detection
●operating Frequency 2.4GHz/5 GHz
●support up to 867Mbps
● 2T2R mode
●Support 20MHz, 40MHz, 80MHz in 5GHz band, and 20MHz, 40MHz band width in 5GHz band.
●support USB 2.0 high data rate mode,10-pin interface
●low power consumption
●support Wi-Fi direct link
●support WFA/ WPA/WPA2 /WPS2.0/WAPI security
●RoH
●MAC /baseband/RF： MT7618BU
3. Product Specification
3.1 Parameter
WLAN Standard
IEEE802.11a/b/g/n/ac
Data Interface
USB2.0
Modulation Mode
WIFI:
802.11b:CCK, DQPSK, DBPSK
802.11a, 802.11g:64QAM, 16QAM, QPSK, BPSK