User Manual

ROBOT USER MANUAL
22
If you need to remote control the robot, please first add the robot, Q-Link supports add multiple robots.
Click the button on the top right corner of the “Q-Link” APP and select “scan QR code” to scan QR codes of the robot (Click “Settings” on the robot → About →
QR code) to add the robot.
Who first scan the robot QR code and confirm on the robot, he/she will be the administrator. And if the robot has an administrator, this time when someone applying for
adding the robot as a friend, the administrator will receive the application message on his/her smart phone. He/she can decide whether or not to agree to the application
and divide them into groups for easier management.
4. Control Robot Remotely
After you finish add the robot, you can use Q-Link to control your robot remotely.
Click on the bottom side to access the robot eye.
Click button to browse videos in the high-definition color camera of the robot.
Click to record the current video. Click again to stop recording.
Click to take pictures of the current video.
Click and then click the operating button to control the direction of movement for the base plate.
Click and then click the operating button to control the direction of movement for the head.
Click and then click the operating button to control the direction of movement for the hand.
Click to send expression to the robot.