ROBOT USER MANUAL
ROBOT USER MANUAL Introduction Thank you for purchasing our product. This manual is for Robot. Please do not allow preschool children to use this product alone. Juveniles should use this product under the guidance of adults. If you allow juveniles to use this product, please be sure to instruct them all do’s and don’ts as well as safe use of electricity.
ROBOT USER MANUAL Part One To Know Your Robot 1. Packing List Robot Charging pile (contains adaptor) Power line Quick guide manual We will arrange the consignment according to your choice of purchase; the above picture is for reference only.
ROBOT USER MANUAL 2.
ROBOT USER MANUAL 2.
ROBOT USER MANUAL 2.
ROBOT USER MANUAL 2.
ROBOT USER MANUAL 3.
ROBOT USER MANUAL Part Two How to Operate the Robot 1. Turn On\Off Press the power switch at the bottom of the robot to turn on or turn off the power. It is easy to move the robot in the state of power-on. But when you need to move the robot in the state of power-off, please push its front body forward, i.e. push it go backwards, or push its back slowly at constant speed. 2.
ROBOT USER MANUAL Part Three To Operate Mobile APP 1. Download and Install Download and install the “Q-Link” APP from the APP Store on your phone. We recommend that you use a phone running Android 4.0 + or IOS 9.0+. 2. Login Open the “Q-Link” APP, click “Login”. If you have not register the Q-Link account, please click “Register” to input user information and then you can get a verification code by SMS on your mobile, input the verification code and click “register” to finish.
ROBOT USER MANUAL If you need to remote control the robot, please first add the robot, Q-Link supports add multiple robots. Click the button on the top right corner of the “Q-Link” APP and select “scan QR code” to scan QR codes of the robot (Click “Settings” on the robot → About → QR code) to add the robot. Who first scan the robot QR code and confirm on the robot, he/she will be the administrator.
ROBOT USER MANUAL Click to open the live video sound of the robot. Click (not touch and hold) the button below and talk to the phone. The APP will automatically recognize your voice and change it into characters so that you can send them to the robot. Note: When you view the video from the camera of the robot via mobile APP, the ear light of the robot will turn red. It can only support one user one time to view videos.
ROBOT USER MANUAL Manage session messages and send messages to contacts or chat with them via video, etc. Receive notification messages. If you are the administrator, you will receive information when someone is applying for adding your robot as a friend. You can decide whether or not to agree to add him/her and assign certain authority for him/her. 7.
ROBOT USER MANUAL 9. Me On the “Me” interface, you can: Change your head portrait, nickname, and password and open your QR code. Show your personal information and QR code. Modify the name of the robot and the smart home devices. View or delete those photos and videos that you take and record when you use the Q-Link APP to browse videos of the robot. Manage the added friends and chats message, quick contact your friends.
ROBOT USER MANUAL Part Four About Battery Charging 1. Place the Charging Pile There are two ways to place the charging pile of the robot. (1) Placing on the ground flat Let the charging metal sheet of the charging pile outward and lean it against a smooth wall. In order not to disturb the robot when it moves, please place the power wire along the wall and make sure there is no barriers, wires, cords, etc. within two to three meters around the charging pile.
ROBOT USER MANUAL with the adapter and then put the adapter back to its original position. Collect wires extending from the left side of the adapter and put them into card slot. Put the power wire into the outlet of the right-hand side and put the cover on the adapter compartments. Mode one: Auto-charging (1) Plug the power wire of the charging pile into the power socket. (2) Add the charging pile to the robot (no need to add again hereafter). ① Click “My Device” on the touch screen of the robot.
ROBOT USER MANUAL Mode Three: Wire charging Take out the power adapter in the charging pile. Connect one end to the charging socket on the back of the robot and the other end to the power socket. Note: Since the robot cannot move in the mode of wire charging, all functions related to movement, such as moving forward, circling, wandering, following, dancing, etc., will be forbidden. But other functions, such as playing films and music, turning on the projector, etc., will not be affected.
ROBOT USER MANUAL For the charging pile: When it isn’t charging, you can press the emergency charging button to charge it when the indicator light keeps yellow. When it is charging, the indicator light blinks as BLN. The lower the residual battery capacity is, the faster the BLN blinks and vice versa. When the robot is fully charged, charging pile will be auto closed, and the indicator light will be turned off.
ROBOT USER MANUAL Part Five FAQ 1. Points for Attention Please do not allow children under seven years old to use this product alone. Juveniles should use this product under the guidance of adults. If you allow juveniles to use this product, please be sure to instruct them all do’s and don’ts as well as safe use of electricity.
ROBOT USER MANUAL 2. FAQ About turning on, turning off and reboot the robot Q: How to turn on the robot? How to turn off the robot? How to reboot the robot? A: Push the power switch on the bottom of the robot to power on or off. There is no reset button in the software or hardware. If you need to reboot the robot, please push the power switch to power off before turning it on again.
ROBOT USER MANUAL including the administrator. If there is no such function for your robot, please upgrade the system version or use the function of administrator shift in the Sanbao APP to change the administrator directly. Q: How to delete friends from the robot? A: The administrator logs in the mobile APP Sanbao and click Intelligence Circle to select the robot. Click the human shape icon to view those friends. Delete one friend by touching and holding it.
ROBOT USER MANUAL Take out of the power adapter of the charging pile and charge up the robot to check if there is adapter failure. Q: How to prevent the robot from out of service as the result of dead battery? A:Access Settings to open the auto-charging mode, add the charging pile for the robot, place the charging pile in the right place and connect it to power supply. About awaken and voice Q: What if the robot is silent? A: Access the voice settings to check whether or not the volume is minimized.
ROBOT USER MANUAL About the APPs in the robot Q: How to add applications to the robot? A: If you want to add some preloaded Apps, please click the “+” button on the Homepage interface. Except for those preloaded Apps, you can access App Market to search Apps and download them. If you can not find the App you want from the App Market, you can apply to the after-sales service of the manufacturer for new Apps.
ROBOT USER MANUAL editing the excel file, please modify the file name of the excel into question.xls or question.xlsx. Please do not change the suffix of the file. For example, if the file is named question.xls, do not change it into question.xlsx at the time of renaming it. Then copy the file into the root directory of your USB flash disk.
ROBOT USER MANUAL A: Refer to the following possible: Check if there is other person who is browsing videos since it can only support one user one time to view videos. Check if the robot is not connected to the internet. Check if the battery of the robot has been used up or the robot is powered off. Check if your mobile is not connected to the internet.
ROBOT USER MANUAL automatically. You can access Settings → Battery → select demo mode to keep the screen light up in operation. If you touch the touch-sensitive parts of the robot and cannot waken it, please check if the battery of the robot has been used up or the robot is powered off.
ROBOT USER MANUAL 3.
ROBOT USER MANUAL Items Specifications Wireless network ZigBee Atmosphere lamp 250 kinds customized colors, 2 cycles for ears , 2 pcs for hands, and 1 cycle for chassis Moving speed 0.8m/s max Grade 1.
ROBOT USER MANUAL 3. Specification (2) Charging pile specification parameter Item Specifications Size 242.7mm (Height) x 110mm (Depth) x 248.5mm (Width) Weight 1.35kg (with adaptor) Input AC 100-240V 50/60Hz Output DC 19V/4.
ROBOT USER MANUAL 41
