User's Manual

J. Deleting Message Waiting Indication
1. Press and hold the
Voice Mail/Func
button to enter the menu.
2. Press the 0 button to go to the MESSAGE WAITING programming option.
3. Press the Flash/Edit button to reset the Message Waiting Indication. “DEL”
will begin flashing.
4. Press and hold the Re/Pa/Save button to delete the indication. A long “beep”
will sound to confirm the setting has been saved.
5. Continue with programming or press the
Voice Mail/Func
button to return to
STANDBY mode.
K. Setting the Area Code
1. Press and hold the
Voice Mail/Func
button to enter the menu.
2. Press the * button to go to the AREA CODE programming option.
3. Press the Flash/Edit button to change the setting. “000” will begin flashing.
4. Press the TELEPHONE KEYPAD
1
to
0
buttons to enter the three digit area
code for your phone number.
5. When the desired setting is displayed, press and hold the Re/Pa/Save button
to save the setting. A long “beep” will sound to confirm the setting has been
saved.
6. Press the
Voice Mail/Func
button to return to STANDBY mode.
NOTE:
Do not use the AREA CODE programming if you are required to dial 10 digits
(XXX-XXX-XXXX) to dial a local number.
Caller ID System Operation
28