User's Manual

Placing Calls

1. Press the

Talk

button, the Call Timer starts to

count.

2. Wait until you hear a dial tone and then dial the

phone number.

When you have finished your call, press the

Talk

button again or place the

HANDSET

on the

BASE

UNIT.

1. Dial the phone number.

2. Press the Talk button. The number displayed will be dialed.

3. When you have finished with your call, press the Talk button again or place the

HANDSET

on the

BASE UNIT.

Redial Feature

1. If you get a busy tone, press the Talk button or

place the HANDSET on the BASE UNIT to

hang up.

2. Later, press the Talk button again.

3. Listen for a dial tone.

4. Press the Re/Pa/Save button. This will

automatically redial the last telephone number

you called.

5. When you have finished with your call, press

the Talk button again or place the HANDSET on

the BASE UNIT.

NOTE:

If you are too far away from the

BASE UNIT,

the

HANDSET

emits “beep” sounds to

warn you that the background noise level is too high for proper communication

between the HANDSET and the BASE UNIT. When you hear this sound, you

should move closer to the BASE UNIT to reduce the noise level. Otherwise, the

call will automatically cut off.

Cordless Telephone Operation