User's Manual

Wall Mounting
6. Place the HANDSET in the CHARGE CRADLE with its LCD Screen facing you. (See Figure 1)
FIGURE 1
IMPORTANT: A “beep” will be heard when the HANDSET is properly positioned in the BASE UNIT
CHARGE CRADLE and charging. Securely positioning the HANDSET in the BASE
UNIT will also prevent the HANDSET from falling.
Cordless Telephone Operation
Preparing for Use
Before you can use your cordless telephone, you must charge the HANDSET for 12 hours.
Failures to do so will require more frequent charging of the BATTERY PACK. See more
information on the BATTERY PACK.
1. Place the HANDSET on the BASE UNIT for 12 hours.
2. After 12 hours, remove the HANDSET from the BASE UNIT.
NOTE:
Depending on the frequency of use, once the HANDSET is fully charged, it remains functional for
approximately 4 hours of continuous use and approximately 5days when the HANDSET is off the
BASE UNIT in STANDBY mode.
IMPORTANT
In order to keep all HANDSETS synchronize all the
times, the function of charge, channel change…etc.
will take longer time.
NO LINE Indicator
This telephone checks for an active TELEPHONE LINE
connection. If “NO LINE” appears on the LCD Screen,
when the HANDSET is in STANDBY mode, no calls can
be made or received from this telephone. Check that
the TELEPHONE LINE CORD plugs are connected to
the wall TELEPHONE JACK and the BASE UNIT
TELEPHONE LINE CONNECTION JACK. If “NO
LINE” continues to be displayed, check that the other
phones in the house are working. If none of the
phones work, contact your local phone company.
Receiving Calls
1. When the phone rings lift the HANDSET and press
the button. The HANDSET LCD Screen
will display “CALLS” and “TALKING”, and the GASE
UNIT IN USE LED indicator will light up.
2. Start your conversation.
3. To end your conversation, either press the
button or place the HANDSET on the BASE
UNIT. If you place the HANDSET on the BASE
UNIT CHARGE CRADLE, you activate the
automatic STANDBY feature.
talk
talk