Instruction Manual

1) Remove the fixing screws from the cover on the external unit
2) Remove the fixing screws from the external unit
3) Make the holes, insert the pins and fix the protecting plate to the wall
4) Connect the cables as shown in the diagram which corresponds to your installation, as shown on
the next page.
5) Screw the exterior unit to the protecting plate.
6) Fix the cover for the exterior unit using the holding screw
Indoor monitor
1) Make the holes as shown in the mounting plate
2) Insert the pins
3) Fix the mounting plate to the wall
4) Connect the cables as shown in the diagram which corresponds to your installation, as shown on
the next page.
5) Connect the power adapter to a socket.
4. Wiring diagram
A: Dry contact normally open
B: Dry contact normally closed