Phau Ntawv Qhia

Camera Installation
Part 1
Attaching the Rear Vision Camera
Mount rear camera to stable surface on rear of
vehicle. Be sure to clean mounting surface with
alcohol.
locations depending on vehicle type. Be sure
desired location is out of the way of any moving
parts and that the camera is in the proper
orientation.
1:
2:
Part 2
Attaching the Rear Vision Camera Harness
Run Chassis harness along the headliner of the
vehicle . Plug camera harness into mirror
harness connector labeled “Camera” and route
down A-pillar with power harness.
Connect the red wire behind the 4-Pin
connector to reverse 12v+. When activated, the
image will zoom out to show entire image with
park line overlay
1:
2:
Double check power connections
If needed, seal body work with silicone Shift into reverse to check reverse trigger
Installation of the Rear Vision Camera
Install Review
Continue to
FullVUE™ Mirror Settings
Installation Instructions - FullVUE™ Mirror Page 5/8AR_01_05_21
Vehicle Application:
Universal
Part Number: FVMR-1000