Phau Ntawv Qhia

Mirror Installation
Double check power connections
Secure foot of mirror onto windsheild
Cycle power in mirror to test functionality
Ensure harness is not pinched by trim panels
Installation of the FullVUE™ Mirror
Install Review
Part 4
Function test of the FullVUE™ Mirror
Connect camera to camera harness and set
aside.
Plug camera harness into mirror harness
5-Pin connector.
Test mirror and camera by turning on ignition
power. You should be able to see both the front
and rear camera after mirror powers up.
1:
2:
3:
Continue to
Camerra Install
Installation Instructions - FullVUE™ Mirror Page 4/8AR_01_05_21
Vehicle Application:
Universal
Part Number: FVMR-1000