User Manual

Setup the Adapter for Windows
NOTE: Before you can begin connecting an additional display, you must
install a driver for the adapter cable. Please follow these instructions
1. Install Driver
1. Download the driver from the link http://bit.ly/elecable select the
correct driver for your operating system.
2. Double click on the driver file to start the installation process.
3. Follow the steps to complete the installation.
4. Once the installation is complete, please reboot your computer.
NOTE:
1. If you are working on a company computer, contact your IT specialist
to log in as an Administrator having the rights to install the driver.
2. If the driver was not successfully installed, please temporarily turn off
real-time antivirus protection, then reinstall it.
3. Uninstall other USB graphics drivers (such as SMSC, DisplayLink),
they cannot be used on your PC simultaneously.
2. Connect the Adapter
1. Connect the HDMI or VGA end to your display’s port, then turn on
your monitor.
2. Connect the USB end to your computer's USB3.0 port. Waiting a few
seconds, your PC will automatically detect the second monitor and
display your PC's desktop screen.
NOTE:
Some laptops don’t have enough juice to push the extra pixels of an
external display, connect the power adapter to give it additional power.