Replacement Part List

WEDGESCLIPS

TILE SIZE

Accommodates tiles

up to 1/2" thick

LEVEL

Flat base maximizes

adhesive coverage

and ensures tile

surface is lippage-free

DESIGN

Notches on each side

of the clip allow mortar

to dispense evenly to

eliminate potential voids

4 CLIP SIZES

Available in four

popular grout widths

1/32", 1/16",

1/8" and 3/16"

HOLD

Wide wedge design holds tiles

securely while mortar dries

COST EFFECTIVE

Reusable 7/8" wide wedge

The Tile Leveling System was developed out of a need to diminish costly mistakes due to unleveled tiles causing

lippage in high-end installations. It is the perfect system to use with tile plank and large-format rectiﬁed

porcelain, marble and stone and the ﬂat base design is ideal for wall tile installations. This time saving system

adjusts the height of the tiles and evenly holds their edges throughout the curing process. It is the most cost

effective installation method on the market to eliminate lippage.

The Tile Leveling System comes in 4 clip sizes, 1/32", 1/16", 1/8" and 3/16", and provides narrow grout lines for

tiles up to 1/2" thick.

2-part system (sold separately)

For Tiles up to 1/2" ThickFor Tiles up to 1/2" Thick

www.QEP.com

J1422-11911

Professional Tools for Professional Results

*25% longer blade life, Proven by 3rd party independent testing.

Tile Leveling System

PA RT

PART

PAGE 1
Tile Leveling System CLIPS PART 2-part system (sold separately) WEDGES For Tiles up to 1/2" Thick PART A B A TILE SIZE Accommodates tiles up to 1/2" thick LEVEL Flat base maximizes adhesive coverage and ensures tile surface is lippage-free DESIGN 4 CLIP SIZES Available in four popular grout widths 1/32", 1/16", 1/8" and 3/16" Notches on each side of the clip allow mortar to dispense evenly to eliminate potential voids HOLD Wide wedge design holds tiles securely while mortar dries B COST EF
PAGE 2
Easy to install and remove! 1 3 2 Slide two clips under the tile and into the mortar approximately 2" from each end of the tile. Place the second tile. Slide the reusable wedges into the clips to level, align, space and hold the tiles. Once mortar has set, simply tap the clips with a non-marring rubber mallet to snap off at the specially designated break-points. Save wedges for future use.