Replacement Part List

The Brand that Stands for Excellence.
www.QEP.com
U.S. Headquarters
866 435 8665
Canada
800 840 9422
Europe/Middle East
0031 24 6485348
Australia
011 61 3 9797 1888
New Zealand
64 9 415 9700
• Use with QEP LASH
Tile Leveling Systems
• Use with QEP LASH and similar
Tile Leveling Systems
Speed up installation with LASH Pliers
Easy to install and remove!
Watch a demonstration video at: www.lashspacer.com
H1517-10418
1 2 3
Slide two clips under the tile and into
the mortar approximately 2" from each
end of the tile. Place the second tile.
Slide the reusable wedges into the
clips to LEVEL, ALIGN, SPACE and
HOLD the tiles.
Once mortar has set, simply tap the clips
with a non-marring rubber mallet to snap
off at the specially designated break-points.
Save wedges for future use.
The LASH system should only be used with a minimum 1/4" x 3/8" x 1/4" square trowel notch
to apply the setting material. Back buttering your tile is always recommended.
LASH Pliers
99750Q
LASH Pro Pliers
99757Q
Easily adjusts for
different wedge lengths
Removable jaw protective caps
allow pliers to accommodate
similar tile leveling systems
Provides maximum force
to push wedges into clips
Item # Type Quantity
99730Q Clips 96/bag (8/case)
99726Q Wedges 96/bag (8/case)
99750Q Pliers (6/case)
99757Q Pro Pliers (6/case)
Tile Size Coverage
6" x 24" 24 ft
2
12" x 24" 38.4 ft
2
18" x 18" 72 ft
2
24" x 24" 32 ft
2
96 96