Replacement Part List

LEVEL: Anchor adjusts to the tiles so they

remain level throughout the installation

ALIGN:

Designed to address variations in

tile thickness

SPACE:

Produces a 1/16" wide grout joint

between tiles

HOLD:

Holds tiles firmly in place to ensure a

lippage-free surface

The Brand that Stands for Excellence.

www.QEP.com

U.S. Headquarters

866 435 8665

Canada

800 840 9422

Europe/Middle East

0031 24 6485348

Australia

011 61 3 9797 1888

New Zealand

64 9 415 9700

U.S. Patent No. 7,992,354

Slot on both sides allows mortar to

disperse evenly to eliminate potential voids

Easy Snap-Off design

Longer, taller design

Designed for quick installation, the LASH

Tile Leveling System (sold separately) reduces costly call backs by

ensuring that the finished tile surface is lippage-free. It is the perfect system to use with any size rectified porcelain,

thin porcelain tile, marble and stone tiles for floor and wall. This fast, simple system is the most cost effective

installation method on the market to eliminate lippage.

The LASH System provides narrow 1/16" grout lines. For grout joints up to 1/4", traditional spacers can be used.

Also available in the Original Curved LASH design for large format floor tiles.

Patented 2-part System

CLIPS WEDGES

For any size Floor & Wall Tiles

THE ORIGINAL Tile Leveling & Spacing System

Round back end for

increased thumb comfort

PAGE 1
THE ORIGINAL Tile Leveling & Spacing System LEVEL: Anchor adjusts to the tiles so they remain level throughout the installation ALIGN: Designed to address variations in tile thickness SPACE: Produces a 1/16" wide grout joint between tiles HOLD: Holds tiles firmly in place to ensure a lippage-free surface CLIPS Patented 2-part System WEDGES For any size Floor & Wall Tiles A B Round back end for increased thumb comfort Easy Snap-Off design Longer, taller design Slot on both sides allows mortar to
PAGE 2
Easy to install and remove! Watch a demonstration video at: www.lashspacer.com 1 2 Slide two clips under the tile and into the mortar approximately 2" from each end of the tile. Place the second tile. Slide the reusable wedges into the clips to LEVEL, ALIGN, SPACE and HOLD the tiles. 3 Once mortar has set, simply tap the clips with a non-marring rubber mallet to snap off at the specially designated break-points. Save wedges for future use.