User's Manual

4
Safety Precautions
General Safety Precautions
Please ensure the following safety precautions are adhered to at all times.
 Follow the electrostatic precautions outlined below whenever the FMIx is
opened.
 Do not apply voltage levels that exceed the specified voltage range. Doing
so may cause fire and/or an electrical shock.
 Electric shocks can occur if the FMIx chassis is opened when the FMIx is
running.
 Do not drop or insert any objects into the ventilation openings of the FMIx.
 If considerable amounts of dust, water, or fluids enter the FMIx, turn off the
power supply immediately, unplug the power cord and battery pack, and contact
the FMIx vendor.
 To prevent the risk of electric shock, make sure power cord is unplugged from
wall socket. To fully disengage the power to the unit, please disconnect the
power cord from the ac outlet.
 Grounding reliability can only be achieved when the equipment is connected to
an equivalent receptacle marked “Hospital Only” or “Hospital Grade”.
 The signal input parts or signal output parts (SIP/SOP) need to be connected
properly and any unused SIP/SOP shall not be accessible to unqualified
personnel after the LCD is integrated into a medical system.
 The unit is 60601-1 certified equipment outside the patient environment.
 Equipment connected to the analog or digital interfaces must comply with the
respective IEC standards (e.g. IEC 60950 for data processing equipment and
IEC 60601-1 for medical equipment).
 DO NOT:
o Drop the FMIx against a hard surface.
o Strike or exert excessive force onto the LCD panel.
o Touch any of the LCD panels with a sharp object