Datasheet

α
[% / K] +0.04
β
[% / K] −0.27
γ
[% / K] −0.34 NMOT [°F] 109 ± 5.4 (43 ± 3 °C)
Hanwha Q CELLS America Inc.
400 Spectrum Center Drive, Suite 1400, Irvine, CA 92618, USA | TEL [phone] | EMAIL [e-mail] | WEB www.q-cells.us
[V] 1500 (IEC) / 1500 (UL) Class II
[A DC] 20 TYPE 1
[lbs/ft
2
] 75 (3600 Pa) / 42 (2000 Pa)
−40 °F up to +185 °F
(−40 °C up to +85 °C)
[lbs/ft
2
] 113 (5400 Pa) / 63 (3000 Pa)
3
See Installation Manual
475 480 485 490 495
[W] 475 480 485 490 495
[A] 11.24 11.26 11.29 11.31 11.34
[V] 53.58 53.61 53.64 53.68 53.71
[A] 10.66 10.71 10.76 10.81 10.86
[V] 44.54 44.81 45.07 45.33 45.59
[%] ≥ 20.5 ≥ 20.7 ≥ 20.9 ≥ 21.2 ≥ 21.4
[W] 356.4 360.1 363.9 3 6 7.6 371.4
[A] 9.05 9.07 9.09 9.12 9.14
[V] 50.53 50.56 50.59 50.62 50.65
[A] 8.39 8.43 8.47 8.52 8.56
[V] 42.49 42.72 42.94 43.17 43.39
53'
40' HC
Certified
UL 61730
89.4 in
2270 mm
43.3 in
1100 mm
47. 6 i n
1210 mm
1809 lbs
821 kg
22 20 29
MECHANICAL SPECIFICATION
Format
87.2 in × 41.1 in × 1.38 in (including frame)
(2216 mm × 1045 mm × 35 mm)
Weight 58.4 lbs (26.5 kg)
Front Cover 0.13 in (3.2 mm) thermally pre-stressed glass with
anti-reflection technology
Back Cover Composite film
Frame Anodized aluminum
Cell 6 × 26 monocrystalline Q.ANTUM solar half cells
Junction Box 2.09-3.98 in × 1.26-2.36 in × 0.59-0.71 in
(53-101 mm × 32-60 mm × 15-18 mm), IP67, with bypass diodes
Cable 4 mm² Solar cable; (+) ≥ 27.6 in (700 mm), (−) ≥ 13.8 in (350 mm)*
Connector Stäubli MC4, Stäubli MC4-Evo2, Hanwha Q CELLS HQC4, IP68
*Long cables (+) ≥ 57.1 in (1450 mm), (−) ≥ 57.1 in (1450 mm) for
landscape installation are available upon request.
Note: Installation instructions must be followed. See the installation and operating manual or contact our technical service department for further information on approved installation and use
of this product.
Specifications subject to technical changes © Q CELLS Q.PEAK DUO XL-G10.c_475-495_2021-08_Rev03_NA
ELECTRICAL CHARACTERISTICS
POWER CLASS
MINIMUM PERFORMANCE AT STANDARD TEST CONDITIONS, STC
1
(POWER TOLERANCE +5 W / −0 W)
Minimum
Power at MPP
1
P
MPP
Short Circuit Current
1
I
SC
Open Circuit Voltage
1
V
OC
Current at MPP I
MPP
Voltage at MPP V
MPP
Efficiency
1
η
MINIMUM PERFORMANCE AT NORMAL OPERATING CONDITIONS, NMOT
2
Minimum
Power at MPP P
MPP
Short Circuit Current I
SC
Open Circuit Voltage V
OC
Current at MPP I
MPP
Voltage at MPP
V
MPP
1
Measurement tolerances P
MPP
± 3 %; I
SC
; V
OC
± 5 % at STC: 1000 W/m
2
, 25 ± 2 °C, AM 1.5 according to IEC 60904-3 •
2
800 W/m², NMOT, spectrum AM 1.5
Q CELLS PERFORMANCE WARRANTY PERFORMANCE AT LOW IRRADIANCE
At least 98 % of nominal power during
first year. Thereafter max. 0.5 %
degradation per year. At least 93.5 %
of nominal power up to 10 years. At
least 86 % of nominal power up to
25years.
All data within measurement toleranc-
es. Full warranties in accordance with
the warranty terms of the Q CELLS
sales organisation of your respective
country.
Typical module performance under low irradiance conditions in
comparison to STC conditions (25 °C, 1000 W/m²)
TEMPERATURE COEFFICIENTS
Temperature Coefficient of I
SC
Temperature Coefficient of V
OC
Temperature Coefficient of P
MPP
Nominal Module Operating Temperature
PROPERTIES FOR SYSTEM DESIGN
Maximum System Voltage V
SYS
PV module classification
Maximum Series Fuse Rating Fire Rating based on ANSI / UL 61730
Max. Design Load, Push / Pull
3
Permitted Module Temperature
on Continuous Duty
Max. Test Load, Push / Pull
3
ASYMMETRIC Q.PEAK DUO L-G10.1/L-G10.2
MIDRAIL
41.1"
(1045 mm)
51.5" (1308 mm)
87.2" (2216 mm)
1.38" (35 mm)
4 × Mounting slots (DETAIL A)
8 × Drainage holes
0.12 × 0.24
" (3 × 6 mm)
Frame
39.5
"
(1003 mm)
NA
17.9" (454 mm)
Label
4 × Grounding holes, Ø 0.18" (4.5 mm)
4 × Drainage holes
≥ 13.8" (350 mm)
≥ 27.6" (700 mm)
15.7" (400 mm)
4 × Mounting slots system Tracker (DETAIL B)
DETAIL A
0.63" (16 mm)
0.33
" (8.5 mm)
0.83" (21 mm)
DETAIL B
0.39" (10 mm)
0.28" (7 mm)
0.87" (22 mm)
39.4"
(1001 mm)
31.1" (790 mm)
EN
RELATIVE EFFICIENCY
COMPARED TO NOMINAL POWER [%]
YEARS
Q CELLS
Industry standard for linear warranties
*
*
Standard terms of guarantee for the 10 PV companies
with the highest production capacity in 2014 (as at: September 2014)
100
95
90
85
80
155 25200 10
98
86
200 400 600 800 1000
110
100
90
80
RELATIVE EFFICIENCY [%]
IRRADIANCE [W/m²]
QUALIFICATIONS AND CERTIFICATES PACKAGING INFORMATION
UL 61730, CE-compliant,
IEC 61215:2016,
IEC 61730:2016,
U.S. Patent No. 9,893,215
(solar cells);
Certification in process.
Horizontal
packaging pallets pallets modules
Drawing not to scale