Datasheet

74.4 in
1890 mm
42.5 in
1080 mm
47. 6 i n
1208 mm
1458 lbs
661 kg
28 24 32
76.8 in
1950 mm
45.3 in
1150 mm
46.7 in
1185 mm
1505 lbs
682.5 kg
28 24 33
α
[% / K] +0.04
β
[% / K] −0.27
γ
[% / K] −0.35 NMOT [°F] 109 ± 5.4 (43 ± 3 °C)
Hanwha Q CELLS America Inc.
400 Spectrum Center Drive, Suite 1400, Irvine, CA 92618, USA | TEL [phone] | EMAIL [e-mail] | WEB www.q-cells.us
[V] 1000 (IEC) / 1000 (UL) Class II
[A DC] 20 TYPE 2
[lbs/ft
2
] 84 (4000 Pa) / 55 (2660 Pa)
−40 °F up to +185 °F
(−40 °C up to +85 °C)
[lbs/ft
2
] 125 (6000 Pa) / 84 (4000 Pa)
3
See Installation Manual
365 370 375 380 385
[W] 365 370 375 380 385
[A] 10.40 10.44 10.47 10.50 10.53
[V] 44.93 44.97 45.01 45.04 45.08
[A] 9.87 9.92 9.98 10.04 10.10
[V] 36.99 37.28 37.5 7 37.8 5 38.13
[%] ≥ 19.3 ≥ 19.5 ≥ 19.8 ≥ 20.1 ≥ 20.3
[W] 273.3 27 7.1 280.8 284.6 288.3
[A] 8.38 8.41 8.43 8.46 8.48
[V] 42.37 42.41 42.44 42.48 42.51
[A] 7.76 7. 81 7.86 7.91 7.96
[V] 35.23 35.48 35.72 35.96 36.20
53'
40' HC
Certified
UL 61730
MECHANICAL SPECIFICATION
Format
72.4 in × 40.6 in × 1.26 in (including frame)
(1840 mm × 1030 mm × 32 mm)
Weight 43.0 lbs (19.5 kg)
Front Cover 0.11 in (2.8 mm) thermally pre-stressed glass with
anti-reflection technology
Back Cover Composite film
Frame Black anodized aluminum
Cell 6 × 22 monocrystalline Q.ANTUM solar half cells
Junction Box 2.09-3.98 in × 1.26-2.36 in × 0.59-0.71 in
(53-101 mm × 32-60 mm × 15-18 mm), IP67, with bypass diodes
Cable 4 mm² Solar cable; (+) ≥ 47.2 in (1200 mm), (−) ≥ 47.2 in (1200 mm)
Connector Stäubli MC4; IP68
Note: Installation instructions must be followed. See the installation and operating manual or contact our technical service department for further information on approved installation and use of this product. Q CELLS supplies solar
modules in two different stacking methods, depending on the location of manufacture (modules are packed horizontally or vertically). You can find more detailed information in the document “Packaging and Transport Information”,
available from Q CELLS.
Specifications subject to technical changes © Q CELLS Q.PEAK DUO BLK ML-G9+_365-385_2021-05_Rev04_NA
ELECTRICAL CHARACTERISTICS
POWER CLASS
MINIMUM PERFORMANCE AT STANDARD TEST CONDITIONS, STC
1
(POWER TOLERANCE +5 W / −0 W)
Minimum
Power at MPP
1
P
MPP
Short Circuit Current
1
I
SC
Open Circuit Voltage
1
V
OC
Current at MPP I
MPP
Voltage at MPP V
MPP
Efficiency
1
η
MINIMUM PERFORMANCE AT NORMAL OPERATING CONDITIONS, NMOT
2
Minimum
Power at MPP P
MPP
Short Circuit Current I
SC
Open Circuit Voltage V
OC
Current at MPP I
MPP
Voltage at MPP
V
MPP
1
Measurement tolerances P
MPP
± 3 %; I
SC
; V
OC
± 5 % at STC: 1000 W/m
2
, 25 ± 2 °C, AM 1.5 according to IEC 60904-3 •
2
800 W/m², NMOT, spectrum AM 1.5
Q CELLS PERFORMANCE WARRANTY PERFORMANCE AT LOW IRRADIANCE
At least 98 % of nominal power during
first year. Thereafter max. 0.5 %
degradation per year. At least 93.5 %
of nominal power up to 10 years. At
least 86 % of nominal power up to
25years.
All data within measurement toleranc-
es. Full warranties in accordance with
the warranty terms of the Q CELLS
sales organisation of your respective
country.
Typical module performance under low irradiance conditions in
comparison to STC conditions (25 °C, 1000 W/m²)
TEMPERATURE COEFFICIENTS
Temperature Coefficient of I
SC
Temperature Coefficient of V
OC
Temperature Coefficient of P
MPP
Nominal Module Operating Temperature
PROPERTIES FOR SYSTEM DESIGN
Maximum System Voltage V
SYS
PV module classification
Maximum Series Fuse Rating Fire Rating based on ANSI / UL 61730
Max. Design Load, Push / Pull
3
Permitted Module Temperature
on Continuous Duty
Max. Test Load, Push / Pull
3
NA
DETAIL A
0.63" (16 mm)
0.33" (8.5 mm)
0.96" (24.5 mm)
42.9" (1088 mm)
72.4" (1840 mm)
4 × Mounting slots (DETAIL A)
Frame
40.6" (1030 mm)
38.6" (981 mm)
1.26" (32 mm)
8 × Drainage holes
15.0“ (376 mm)
4 × Grounding points ø 0.18" (4.5 mm)
Label
≥ 47.2" (1200 mm)
≥ 47.2" (1200 mm)
EN
RELATIVE EFFICIENCY
COMPARED TO NOMINAL POWER [%]
YEARS
Q CELLS
Industry standard for linear warranties
*
*
Standard terms of guarantee for the 10 PV companies
with the highest production capacity in 2014 (as at: September 2014)
100
95
90
85
80
155 25200 10
98
86
200 400 600 800 1000
110
100
90
80
RELATIVE EFFICIENCY [%]
IRRADIANCE [W/m²]
QUALIFICATIONS AND CERTIFICATES PACKAGING AND TRANSPORT INFORMATION
UL 61730, CE-compliant,
Quality Controlled PV - TÜV Rheinland,
IEC 61215:2016,
IEC 61730:2016,
U.S. Patent No. 9,893,215
(solar cells)
Horizontal
packaging pallets pallets modules
Vertical
packaging pallets pallets modules