Datasheet

NA
DETAIL A
0.63" (16 mm)
0.33" (8.5 mm)
0.96" (24.5 mm)
42.8" (1088 mm)
74.0" (1879 mm)
4 × Mounting slots (DETAIL A)
Frame
41.1" (1045 mm)
39.2" (996 mm)
1.26" (32 mm)
8 × Drainage holes
15.6“ (395.5 mm)
4 × Grounding points ø 0.18" (4.5 mm)
Label
≥ 49.2" (1250 mm)
≥ 49.2" (1250 mm)
Format
74.0in × 41.1in × 1.26in (including frame)
(1879mm × 1045mm × 32mm)
Weight 48.5lbs (22.0kg)
Front Cover 0.13 in (3.2mm) thermally pre-stressed glass
with anti-reflection technology
Back Cover Composite film
Frame Black anodised aluminium
Cell 6 × 22 monocrystalline Q.ANTUM solar half cells
Junction box
2.09-3.98in × 1.26-2.36in × 0.59-0.71in
(53-101mm × 32-60mm × 15-18mm), IP67, with bypass diodes
Cable 4mm Solar cable; (+) ≥49.2in (1250mm), (−) ≥49.2in (1250mm)
Connector Stäubli MC4; IP68
Mechanical Specification
Qcells pursues minimizing paper output in consideration of the global environment.
Note: Installation instructions must be followed. Contact our technical service for further information on approved installation of this product.
Hanwha Q CELLS America Inc. 400 Spectrum Center Drive, Suite 1400, Irvine, CA 92618, USA | TEL [phone] | EMAIL [e-mail] | WEB www.qcells.com
Q.PEAK DUO BLK MLG10+ SERIES
Specifications subject to technical changes © Qcells Q.PEAK_DUO_BLK_ML-G10+_series_385-405_2022-07_Rev02_NA
Properties for System Design
Maximum System Voltage V
SYS
[V] 1000 (IEC)/1000 (UL) PV module classification Class II
Maximum Series Fuse Rating [A DC] 20 Fire Rating based on ANSI / UL 61730 TYPE 2
Max. Design Load, Push / Pull
3
[lbs/ft
2
] 75 (3600Pa)/55 (2660Pa)
Permitted Module Temperature
on Continuous Duty
−40°F up to +185°F
(−40°C up to +85°C)
Max. Test Load, Push / Pull
3
[lbs/ft
2
] 113 (5400Pa)/84 (4000Pa)
3
See Installation Manual
UL 61730, CE-compliant,
Quality Controlled PV - TÜV Rheinland,
IEC 61215:2016, IEC 61730:2016,
U.S. Patent No. 9,893,215 (solar cells),
Qualifications and Certificates
200 400 600 800 1000
90
100
80
110
10 2515 200 05
86
98
95
80
100
85
Electrical Characteristics
TEMPERATURE COEFFICIENTS
Temperature Coecient of I
SC
α [%/K] +0.04 Temperature Coecient of V
OC
β [%/K] −0.27
Temperature Coecient of P
MPP
γ [%/K] −0.34 Nominal Module Operating Temperature NMOT [°F]
109±5.4
(43±3°C)
POWER CLASS 385 390 395 400 405
MINIMUM PERFORMANCE AT STANDARD TEST CONDITIONS, STC POWER TOLERANCE +5W/−0W
Minimum
Power at MPP
1
P
MPP
[W] 385 390 395 400 405
Short Circuit Current
1
I
SC
[A] 11.04 11.07 11.10 11.14 11.17
Open Circuit Voltage
1
V
OC
[V] 45.19 45.23 45.27 45.3 45.34
Current at MPP I
MPP
[A] 10.59 10.65 10.71 10.77 10.83
Voltage at MPP V
MPP
[V] 36.36 36.62 36.88 37.13 37.39
Eciency
1
η [%] ≥ 19.6 ≥ 19.9 ≥ 20.1 ≥ 20.4 ≥ 20.6
MINIMUM PERFORMANCE AT NORMAL OPERATING CONDITIONS, NMOT
Minimum
Power at MPP P
MPP
[W] 288.8 292.6 296.3 300.1 303.8
Short Circuit Current I
SC
[A] 8.90 8.92 8.95 8.97 9.00
Open Circuit Voltage V
OC
[V] 42.62 42.65 42.69 42.72 42.76
Current at MPP I
MPP
[A] 8.35 8.41 8.46 8.51 8.57
Voltage at MPP
V
MPP
[V] 34.59 34.81 35.03 35.25 35.46
Measurement tolerances P
MPP
±3%; I
SC
; V
OC
±5% at STC: 1000W/m, 25±2°C, AM 1.5 according to IEC 60904-3 • 800W/m, NMOT, spectrum AM 1.5
RELATIVE EFFCIENCY [%]
Qcells PERFORMANCE WARRANTY PERFORMANCE AT LOW IRRADIANCE
At least 98 % of nominal power
during first year. Thereafter max.
0.5 % degradation per year. At
least 93.5 % of nominal power
up to 10 years. At least 86 % of
nominal power up to 25 years.
All data within measurement
tolerances. Full warranties in
accordance with the warranty
terms of the Qcells sales
organisation of your respective
country.
Typical module performance under low irradiance conditions in
comparison to STC conditions (25 °C, 1000 W/m
2
).
YEARS
IRRADIANCE [W/m]
Qcells
Industry standard of p-mono*
*Standard terms of guarantee for the 5 PV companies with the
highest production capacity in 2021 (February 2021)
Certified
UL 61730
RELATIVE EFFCIENCY COMPARED TO NOMINAL POWER [%]